Audio T Verdict
The Sonus faber Sonetto Wall G2 is one of those speakers that solves a very real problem without feeling like a compromise. It gives you much of the driver technology and finish associated with the Sonetto G2 range in a cabinet only 168mm deep, allowing a serious music or home cinema system where floorstanding speakers, conventional stands or large rear surrounds simply are not practical.
Its sealed-box design is particularly well suited to wall mounting. There is no bass-reflex port that needs space to breathe behind the cabinet, while the adjustable articulated bracket allows the speaker to be directed towards the listening area rather than simply firing straight ahead. Inside, the 6.5-inch midwoofer uses the flower-patterned suspension developed for Sonetto G2, while the D.A.D. Arrow Point tweeter and Phase Coherent crossover aim to maintain the same family character as the rest of the range.
With 60Hz bass extension, Sonetto Wall G2 is capable of much more than background or effects duty. A pair can form a compact two-channel system, while in home cinema it makes an excellent side or rear surround alongside Sonetto G2 front speakers and the Sonetto Centre G2. Its 87dB sensitivity and 4-ohm impedance mean good amplification still matters, but the 30–200W recommendation leaves plenty of suitable stereo and AV electronics to choose from.
Sold Individually
The Sonus faber Sonetto Wall G2 is priced and supplied as a single loudspeaker. Order two speakers if you require a stereo pair or a pair of matching surround channels.
Sonus faber Sonetto Wall G2 On-Wall Speaker
The Sonus faber Sonetto Wall G2 is a compact passive loudspeaker designed specifically for wall mounting, combining a sealed two-way enclosure with an adjustable articulated mounting system.
It can be used as a space-saving stereo loudspeaker, side or rear surround speaker, or as part of a complete Sonetto G2 home cinema installation.
Each speaker combines a 1.1-inch D.A.D. Arrow Point extended-frequency tweeter with one 6.5-inch midwoofer. A 3100Hz crossover integrates the two drivers, while the sealed enclosure allows the cabinet to work without the rear clearance required by a conventional bass-reflex port.
- Current Sonetto G2 on-wall loudspeaker
- Sold individually
- Two-way passive design
- Sealed-box enclosure
- Purpose-designed for wall mounting
- Adjustable articulated wall bracket
- Suitable for stereo and home cinema
- 1.1-inch D.A.D. Arrow Point tweeter
- Extended-frequency soft-dome tweeter
- Copper shorting ring in tweeter motor
- 6.5-inch midwoofer
- Aluminium demodulation ring in midwoofer motor
- Paper-pulp sandwich-cone technology
- Flower-patterned midwoofer surround
- Asymmetric suspension geometry
- Phase Coherent crossover philosophy
- 3100Hz crossover point
- 60Hz–40kHz frequency response
- 87dB sensitivity
- 4-ohm nominal impedance
- 30–200W recommended amplifier power
- Redesigned lute-shaped cabinet
- Wood construction
- Leather detailing
- Walnut Wood and Leather finish
- Wenge Wood and Leather finish
- Black and Leather finish
- 437mm high
- 271mm wide
- Only 168mm deep
- 6.8kg per speaker
- Built as part of the Sonetto G2 Collection in Vicenza, Italy
Designed for the Wall From the Beginning
Sonetto Wall G2 is not simply a conventional bookshelf speaker with holes added to the back.
The cabinet, acoustic loading and adjustable mounting arrangement have all been developed around on-wall use.
Why Choose an On-Wall Speaker?
Wall-mounted speakers can be particularly useful where:
- Floor space is limited
- Speaker stands are impractical
- Surround speakers need to remain clear of walkways
- The room has young children or pets
- You want a visually cleaner installation
- A conventional floorstander would dominate the room
- Rear speakers need to sit behind furniture
- You are building a multi-purpose living room rather than a dedicated cinema
Only 168mm Deep
At 168mm deep, Sonetto Wall G2 sits much closer to the wall than a conventional Sonetto bookshelf speaker on a stand.
This makes it especially useful for side and rear channels, where a deep cabinet can otherwise project awkwardly into the room.
Sealed-Box Design
Unlike the vented Sonetto I G2 and Sonetto II G2, Sonetto Wall G2 uses a completely sealed enclosure.
There is no bass-reflex port.
Why Use a Sealed Cabinet?
A sealed enclosure is particularly logical for a speaker intended to operate close to a wall.
It avoids:
- A rear port being obstructed by the wall
- Needing additional clearance for reflex airflow
- Port noise
- Unwanted internal frequencies escaping through a reflex opening
Transient Response
Sonus faber specifically uses the sealed design to support transient response and reduce internal resonant behaviour.
In simple terms, the air trapped inside the sealed cabinet forms part of the restoring force acting on the midwoofer.
Does Sealed Mean No Bass?
No.
Sonetto Wall G2 still reaches to a published 60Hz, which is enough to reproduce a substantial proportion of normal musical bass.
The compromise compared with a larger vented speaker is simply that it does not extend as deeply into the lowest frequencies.
60Hz Bass Extension
For a cabinet only 168mm deep, 60Hz is useful low-frequency extension.
It covers significant energy from:
- Bass guitar
- Kick drum
- Male vocals
- Acoustic guitar
- Piano
- Cello
- Film effects
- Television dialogue and music
Does Sonetto Wall G2 Need a Subwoofer?
That depends on how you use it.
For Background or General Music
A subwoofer is not essential.
Its 60Hz response is sufficient for a large amount of everyday listening.
For Serious Two-Channel Music
A subwoofer can be very worthwhile if you want the system to reproduce deep bass below the natural range of the Sonetto Wall G2.
For Home Cinema
A dedicated subwoofer is strongly recommended for complete low-frequency effects and soundtrack reproduction.
Wall Mounting Naturally Reinforces Bass
Placing a loudspeaker against a room boundary increases low-frequency reinforcement compared with positioning the same speaker well into free space. Sonetto Wall G2 has been designed specifically around this installation, but the final bass balance will still depend on the room and mounting position.
Why a Sealed Speaker Can Work Well With a Subwoofer
A sealed loudspeaker generally has a predictable low-frequency roll-off without a reflex port contributing additional output around its tuning frequency.
This can make it relatively straightforward to blend with a properly configured active subwoofer.
Subwoofer Integration for Stereo
For two-channel systems, the subwoofer should extend Sonetto Wall G2 rather than draw attention to itself.
Pay particular attention to:
- Subwoofer level
- Crossover frequency
- Phase
- Subwoofer position
Subwoofer Integration for Home Cinema
An AV receiver can redirect low-frequency information beneath the selected crossover to a dedicated subwoofer.
This also reduces excursion demand on the Sonetto Wall G2 midwoofer and can increase overall system headroom.
6.5-Inch Midwoofer
The Sonetto Wall G2 uses one 6.5-inch midwoofer to reproduce all frequencies beneath the 3100Hz crossover point.
This gives the compact wall-mounted speaker considerably more radiating area than smaller satellite speakers.
A Proper Hi-Fi Driver
The Sonetto Wall G2 uses the same broad G2 driver philosophy found throughout the Sonetto Collection rather than relying on a small specialist effects driver.
That is important because Sonus faber intends the Wall G2 to work not only for surround effects but also for serious stereo listening.
Paper-Pulp Sandwich Cone
Sonetto G2 woofers and midwoofers use paper-pulp sandwich structures.
A sandwich diaphragm combines material layers to balance:
- Low moving mass
- Rigidity
- Internal damping
- Controlled resonance behaviour
Why Paper Pulp?
Paper-based driver materials remain widely used because they combine low mass with useful natural damping.
The sandwich structure allows the mechanical properties to be developed further without simply making the cone thicker and heavier.
Flower-Patterned Surround
The midwoofer uses Sonus faber's distinctive flower-patterned rubber surround.
Its shape takes inspiration from the Camelia geometry developed within the wider Sonus faber engineering programme.
Why Is the Surround Asymmetric?
A conventional surround repeats the same circular geometry all the way around the driver.
Sonus faber deliberately breaks that symmetry.
The manufacturer uses the flower-patterned profile to help:
- Reduce conventional circular modes
- Improve linearity
- Reduce interference
- Improve sound dispersion
Why the Surround Matters
The surround is not simply a flexible ring holding the cone in place.
It forms part of the driver's suspension and controls how the diaphragm moves forwards and backwards.
Aluminium Demodulation Ring
The midwoofer motor incorporates an aluminium demodulation ring.
This conductive element helps control changes in voice-coil inductance as the diaphragm moves through the magnetic field.
Why Motor Linearity Matters
A loudspeaker driver's electrical and magnetic behaviour can change as its voice coil moves.
Demodulation techniques are used to keep this behaviour more consistent and reduce distortion associated with the motor system.
D.A.D. Arrow Point Tweeter
High frequencies are handled by a 1.1-inch D.A.D. Arrow Point extended-frequency soft-dome tweeter.
D.A.D. stands for Damped Apex Dome.
What Is Damped Apex Dome?
Soft-dome tweeters combine low moving mass with useful mechanical damping, but the centre of the dome does not remain perfectly rigid at every frequency.
At very high frequencies, the apex can begin moving differently from the surrounding diaphragm.
Sonus faber's D.A.D. arrangement controls this central region.
Arrow Point
The distinctive Arrow Point element acts on the apex of the soft dome while allowing the remainder of the diaphragm to operate normally.
The intention is to combine:
- Low moving mass
- Natural soft-dome damping
- Controlled high-frequency behaviour
- Extended treble response
Copper Shorting Ring
The tweeter motor uses a copper shorting ring.
This helps control changing inductance and contributes to more consistent motor behaviour as the voice coil moves.
40kHz Upper Frequency Response
The Sonetto Wall G2 system is specified to 40,000Hz.
This extends above the conventional range of human hearing but demonstrates the wide operating bandwidth of the high-frequency system.
3100Hz Crossover
The 6.5-inch midwoofer hands over to the D.A.D. Arrow Point tweeter at 3100Hz.
The crossover therefore sits above much of the fundamental vocal range, leaving the midwoofer to reproduce a broad section of music and dialogue before the tweeter takes over.
Phase Coherent Crossover
Sonus faber applies its Phase Coherent crossover philosophy to the Sonetto G2 Collection.
The aim is to synchronise the phase rotation of the drive units through the frequencies where their outputs overlap.
Why Phase Matters
The tweeter and midwoofer do not exchange frequencies at one instantaneous point.
Both contribute around the crossover region.
The relationship between them can influence:
- Vocal focus
- Soundstage definition
- Off-axis consistency
- Frequency balance
- Image stability
Useful for Off-Axis Listening
Off-axis performance is particularly relevant to an on-wall speaker because it may be mounted to the side or behind the main listening position.
The adjustable bracket allows the physical speaker angle to be tailored to the installation rather than forcing the listener to sit directly in front of a fixed cabinet.
Adjustable Articulated Wall Bracket
One of Sonetto Wall G2's most useful features is its movable articulated mounting arrangement.
This allows the speaker to be oriented towards the listening area after it has been mounted.
Why Adjustable Aiming Matters
Wall locations are often dictated by architecture rather than perfect acoustic geometry.
An adjustable speaker can compensate for some of these practical constraints by directing the tweeter and midwoofer towards the listeners.
Side-Wall Mounting
For surround use, Sonetto Wall G2 can be installed on the side walls where the room layout allows.
The adjustable mounting system allows the speaker to be aimed towards the listening area rather than simply firing across the room at a fixed angle.
Rear-Wall Mounting
The speaker is equally well suited to rear-wall positions behind the listening area.
This can be particularly useful where floorstanding surrounds would obstruct walkways or furniture.
Mounting Height
The ideal height depends on the speaker's role and the seating arrangement.
For surround use, aim for consistent positioning between matching left and right channels and use the adjustable bracket to direct the output appropriately towards the listening area.
Symmetry Matters
If Sonetto Wall G2 is used as a stereo pair or matching surround pair, mount the two speakers at consistent heights and similar angles where practical.
Large differences between left and right mounting positions can make the sound field feel unbalanced.
Plan the Position Before Drilling
Wall mounting is less forgiving than moving a speaker stand around the room.
Before installation, consider:
- Speaker height
- Listening position
- Left and right symmetry
- Bracket adjustment
- Speaker cable route
- Wall construction
- Television or screen position
- Furniture
- Doors and walkways
Wall Construction and Fixings Matter
Each Sonetto Wall G2 weighs 6.8kg before allowing for its mounting hardware. The wall and fixings must be suitable for the total installed load. Different masonry, timber-frame and plasterboard constructions require different fixings, so use an appropriately qualified installer where there is any uncertainty.
Do Not Guess Where Pipes or Cables Run
Before drilling into a wall, make sure the intended mounting area is clear of hidden electrical wiring, plumbing and other services.
Speaker Cable Planning
An on-wall installation looks considerably neater when the speaker cable route is planned at the same time as the mounting position.
Possible approaches include:
- Surface cable management
- Decorative cable trunking
- Pre-installed speaker cable within suitable walls
- Professional custom installation
Leave Enough Cable for Adjustment
If the bracket allows the cabinet to change angle, the speaker cable also needs enough slack to accommodate that movement without pulling on the connection.
Do Not Trap the Cable
Make sure the mounting mechanism cannot pinch or sharply bend the speaker cable as the cabinet is adjusted.
87dB Sensitivity
Sonetto Wall G2 is specified at 87dB SPL for 2.83V measured at one metre.
This gives it reasonable sensitivity for a compact sealed loudspeaker.
4-Ohm Nominal Impedance
The nominal impedance is 4 ohms.
This means the amplifier or AV receiver should be comfortable supplying current into a lower-impedance loudspeaker load.
30–200W Recommended Amplification
Sonus faber recommends amplifier power between 30 and 200 watts.
That broad range allows Sonetto Wall G2 to work with anything from a compact quality integrated amplifier to serious multichannel power amplification.
Will a 30W Amplifier Work?
Yes.
A capable 30W amplifier sits within the official range and can work successfully at sensible levels in smaller spaces.
What About 50W?
Fifty watts can be entirely suitable for normal domestic listening, provided the amplifier is comfortable with the 4-ohm load.
70–100W Amplification
This gives useful headroom for:
- Medium-sized rooms
- Longer listening distances
- Dynamic music
- Home cinema effects
Can I Use 150W?
Yes.
A capable 150W amplifier remains comfortably within Sonus faber's recommendation.
Can I Use 200W?
Yes. That is the upper end of the current published amplifier range.
As with any speaker, the volume control still needs to be used sensibly.
AV Receiver Power Figures Need Context
When Sonetto Wall G2 is used in a multichannel system, remember that an AV receiver may be powering five, seven or more speakers simultaneously. A unit quoting a large stereo wattage does not necessarily deliver the same figure to every channel at once. Power-supply quality and 4-ohm capability matter.
Using Sonetto Wall G2 for Stereo
Sonus faber specifically positions the Wall G2 as a viable space-saving two-channel loudspeaker rather than limiting it to surround duties.
A pair can therefore form a compact conventional stereo system.
A Wall-Mounted Hi-Fi System
This can be especially attractive where:
- The room is narrow
- Floorstanders would obstruct furniture
- Speaker stands are undesirable
- A clean contemporary installation is important
- Children or pets make floor-mounted speakers inconvenient
Can Sonetto Wall G2 Replace Sonetto I G2?
It can provide an alternative where wall mounting is more important than the additional low-frequency capability of the bookshelf model.
The two designs have different acoustic priorities.
Sonetto Wall G2 vs Sonetto I G2
Sonus faber Sonetto I G2 is the smallest conventional bookshelf and standmount speaker in the range.
Sonetto Wall G2
- On-wall loudspeaker
- Sold individually
- Two-way sealed box
- 1.1-inch D.A.D. Arrow Point tweeter
- 6.5-inch midwoofer
- 3100Hz crossover
- 60Hz–40kHz response
- 87dB sensitivity
- 4-ohm impedance
- 30–200W amplification
- 437 x 271 x 168mm
- 6.8kg each
- Adjustable wall mounting
Sonetto I G2
- Bookshelf / standmount loudspeaker
- Sold as a pair
- Two-way front-vented box
- 1.1-inch D.A.D. Arrow Point tweeter
- 5-inch midwoofer
- 2100Hz crossover
- 52Hz–40kHz response
- 86dB sensitivity
- 4-ohm impedance
- 30–150W amplification
- 377 x 200 x 304mm
- 8.4kg each
- Dedicated stands available separately
Choose Sonetto Wall G2 If...
- Wall mounting is a priority
- Floor space is limited
- You need side or rear surround speakers
- You want a sealed-box design
- You want adjustable speaker aiming
- A cabinet only 168mm deep is advantageous
Choose Sonetto I G2 If...
- You want a conventional standmount installation
- You want deeper bass without a subwoofer
- You want freedom to move the speakers around the room
- Speaker stands are practical
- Stereo listening is the primary application
Sonetto Wall G2 vs Sonetto II G2
Sonus faber Sonetto II G2 is substantially larger and intended primarily for standmount stereo use.
Sonetto Wall G2
- Wall mounted
- 6.5-inch midwoofer
- Sealed enclosure
- 60Hz lower response
- 87dB sensitivity
- 30–200W amplification
- 168mm deep
- 6.8kg
Sonetto II G2
- Standmount / bookshelf
- 6.5-inch midwoofer
- Front-vented enclosure with Intono
- 42Hz lower response
- 87dB sensitivity
- 30–200W amplification
- 355mm deep
- 10.4kg each
Same Driver Size, Very Different Cabinet
Both models use a 6.5-inch midwoofer and share the same sensitivity and recommended amplifier range, but their cabinet concepts are very different.
Sonetto II G2 has much greater internal volume and reflex loading, allowing it to reach 42Hz.
Sonetto Wall G2 sacrifices some of that low-frequency extension to gain a much shallower sealed enclosure specifically intended for wall mounting.
Choose Sonetto II G2 for Maximum Stereo Performance
If floor space and stands are not an issue, the deeper bass of Sonetto II G2 makes it the more obvious stereo choice.
Choose Sonetto Wall G2 for Integration
If the room demands a visually discreet wall-mounted solution, Wall G2 achieves something the conventional Sonetto bookshelf speakers cannot.
Home Cinema Use
Home cinema is one of Sonetto Wall G2's most natural applications.
Its compact dimensions, sealed enclosure and adjustable bracket allow it to be integrated into the room without requiring stands behind or beside the seating position.
Side Surround Speakers
Sonetto Wall G2 can be used as the left and right surround channels in a conventional 5.1 system.
The adjustable bracket helps direct the speakers towards the main seating area where appropriate.
Rear Surround Speakers
In a 7.1 system, additional Sonetto Wall G2 speakers can be used behind the seating area as rear surrounds.
Dolby Atmos Systems
Sonetto Wall G2 can be used for the conventional ear-level surround channels within a Dolby Atmos system.
The AV receiver or processor performs the Atmos decoding; Sonetto Wall G2 simply reproduces the channel signal assigned to it.
DTS:X Systems
The same applies to DTS:X and other object-based surround formats.
Matching Sonetto Centre G2
Sonus faber Sonetto Centre G2 is the dedicated centre-channel loudspeaker for the current Sonetto range.
Using Sonetto G2 speakers throughout the cinema helps maintain related:
- D.A.D. Arrow Point tweeter technology
- Driver material philosophy
- Crossover voicing
- Cabinet construction
- Overall tonal character
Matching Sonetto III G2
Sonus faber Sonetto III G2 makes an excellent compact floorstanding front left and right pair, with Wall G2 speakers taking care of the surround channels.
Matching Sonetto V G2
Sonus faber Sonetto V G2 provides greater front-channel scale for larger rooms while retaining Sonetto Wall G2 as a discreet surround solution.
Matching Sonetto VIII G2
Sonus faber Sonetto VIII G2 can form the front left and right channels in the most ambitious Sonetto G2 home cinema systems.
Can Sonetto Wall G2 Be Used at the Front?
Yes.
Sonus faber specifically positions it as a possible space-saving two-channel loudspeaker, so there is nothing limiting it to rear-channel use.
A Compact 3.1 System
A pair of Sonetto Wall G2 speakers, Sonetto Centre G2 and a capable subwoofer can create a high-quality front stage while keeping the left and right speakers off the floor.
Should Sonetto Wall G2 Be Set to Small?
When a subwoofer is present in a home cinema system, yes, this is normally a sensible starting point.
"Small" in AV terminology simply means that frequencies beneath the selected crossover are redirected to the subwoofer.
Does Small Mean Inferior?
No.
It is simply a bass-management instruction.
What AV Crossover Should I Use?
There is no universal setting for every room.
Because Sonetto Wall G2 is specified down to 60Hz, a crossover above its natural lower limit is normally sensible when using a subwoofer.
Is 80Hz a Sensible Starting Point?
Yes.
An 80Hz crossover is a useful conventional starting point for many installations using a capable subwoofer.
Final settings should be determined by the room, speaker locations and calibration results.
Why Not Cross Over at 60Hz?
The published 60Hz figure describes the speaker's usable frequency response rather than an instruction to run it down to exactly that point in every system.
Giving the speaker some headroom above its low-frequency limit can reduce excursion and amplifier demand.
Can It Run Full Range?
Yes where the system allows, particularly for straightforward stereo use.
In home cinema, a capable subwoofer normally provides a better route to deep bass and dedicated LFE reproduction.
Home Cinema Calibration
After installation, use the AV receiver's calibration system to establish:
- Speaker distance
- Channel level
- Crossover frequency
- Subwoofer integration
- Room correction where available
Check the Results Afterwards
Automatic calibration is a useful starting point rather than something that should never be questioned.
Check that:
- Left and right surround distances are plausible
- Channel levels are sensible
- The speakers have not been assigned an unnecessarily low crossover
- Speaker sizes are configured appropriately
Room Correction Cannot Fix Bad Mounting
Electronic correction cannot compensate for:
- A loose wall fixing
- A speaker aimed in the wrong direction
- Major left/right height differences
- Blocked speaker cable movement
- Severe physical obstructions directly in front of the drivers
Using Sonetto Wall G2 for Multi-Room Audio
The compact wall-mounted format can also be useful in distributed-audio installations where conventional floorstanding speakers are not practical.
Potential rooms include:
- Kitchens
- Dining rooms
- Home offices
- Bedrooms
- Secondary living rooms
Passive Multi-Room Installation
Sonetto Wall G2 is a passive loudspeaker, so each unit requires speaker cable from an appropriate amplifier or distributed-audio system.
It does not contain built-in streaming, Bluetooth or amplification.
Using a Streaming Amplifier
A compact streaming amplifier can make an extremely neat two-channel Sonetto Wall G2 system.
The speakers remain permanently installed on the wall while streaming, DAC and amplification are handled by one compact electronics unit.
Good for Vinyl?
Yes.
A pair of Sonetto Wall G2 speakers can form part of a proper two-channel hi-fi system with a turntable, phono stage and suitable amplifier.
Good for Streaming?
Yes.
A network streamer or streaming amplifier is a particularly natural partner for a visually discreet wall-mounted system.
Good for CD?
Yes.
The speakers are source agnostic and can be used with any suitable hi-fi amplifier system.
Good for Television?
Yes, particularly as part of an AV receiver-based system.
A pair can also provide high-quality left and right channels for television sound where a conventional floorstanding setup is impractical.
Good for Gaming?
Yes.
They are particularly well suited to surround positions where keeping speakers off the floor reduces clutter around the gaming area.
Good for Concert Films?
Yes.
Because Sonetto Wall G2 is a genuine hi-fi loudspeaker rather than a simple effects satellite, it can handle the musical content present in multichannel concert recordings.
Good for Multichannel Music?
Yes.
A Sonetto G2 system can reproduce SACD, Blu-ray Audio and immersive music mixes with a consistent loudspeaker family around the room.
Good for Vocals?
Yes.
The 6.5-inch midwoofer handles a large amount of the vocal spectrum before handing over to the tweeter at 3100Hz.
Good for Acoustic Music?
Yes.
The two-way architecture and substantial midwoofer make it entirely suitable for guitars, vocals, strings and smaller ensembles.
Good for Rock?
Yes, although adding a subwoofer gives drums and bass guitar greater physical weight in a full-range system.
Good for Electronic Music?
Yes, but electronic music frequently extends well below 60Hz.
A subwoofer is therefore especially useful if deep synthesised bass is important.
Good for Classical Music?
Yes.
For full-scale orchestral reproduction, adding a subwoofer or choosing one of the larger Sonetto floorstanders will provide greater low-frequency scale.
Cabinet Dimensions
- Height: 437mm
- Width: 271mm
- Depth: 168mm
- Weight: 6.8kg per speaker
Compact Does Not Mean Tiny
At 437mm high and 271mm wide, Sonetto Wall G2 has a meaningful visual presence despite its shallow depth.
Use the actual dimensions when planning an installation rather than assuming that an on-wall speaker will behave like a small satellite.
Allow for Bracket Movement
The quoted 168mm depth describes the cabinet itself.
An installation also needs to account for the mounting system and any space required for adjustment and speaker cable routing.
6.8kg Weight
Each loudspeaker weighs 6.8kg.
This is manageable for an on-wall design but substantial enough that correct wall construction and fixings are essential.
Packaging
Each Sonetto Wall G2 is packed individually.
- Carton height: 545mm
- Carton width: 380mm
- Carton depth: 265mm
- Packaged weight: 9.04kg
- Carton quantity: One speaker
Keep the Packaging
Retain the original carton and protective packaging if possible.
It provides the safest way to transport the finished cabinet if the speaker ever needs to be moved or serviced.
Redesigned Lute-Shaped Cabinet
Sonetto Wall G2 adapts Sonus faber's characteristic lute-inspired enclosure to a shallow wall-mounted format.
The curved shape is used to help control internal resonances while retaining the visual identity of the Sonetto range.
Why Avoid a Plain Rectangular Box?
Large parallel internal surfaces can encourage standing waves within an enclosure.
Curved cabinet geometry gives the designer more control over internal acoustic reflections.
Wood and Leather
Sonetto Wall G2 continues Sonus faber's use of traditional furniture materials rather than presenting itself as purely architectural loudspeaker hardware.
Wood and leather help it visually match the conventional bookshelf, floorstanding and centre-channel models in the range.
Walnut Wood and Leather
Walnut provides the warmest and most traditional finish, with natural timber grain remaining a prominent part of the appearance.
Wenge Wood and Leather
Wenge offers a darker wood appearance while retaining visible natural grain.
Black and Leather
Black provides the most discreet finish for home cinema installations and can blend particularly easily with televisions, projection screens and dark room décor.
Natural Wood Variation
Walnut and Wenge are natural materials, so small differences in grain and tone should be expected.
Part of the Sonetto G2 Collection
Sonetto G2 is built around a complete family rather than a collection of unrelated speakers.
The range includes:
- Sonetto I G2 bookshelf speaker
- Sonetto II G2 bookshelf speaker
- Sonetto III G2 floorstander
- Sonetto V G2 floorstander
- Sonetto VIII G2 floorstander
- Sonetto Centre G2
- Sonetto Wall G2
Built in Vicenza, Italy
The Sonetto G2 Collection is built by Sonus faber's artisans in Vicenza, Italy.
The Wall G2 therefore provides the same broader Sonetto approach to Italian construction and finish in an installation-friendly format.
Recommended Stereo Setup Routine
- Decide on the listening position before choosing the final wall locations.
- Measure the mounting points carefully.
- Keep left and right speaker heights consistent.
- Keep the two speakers reasonably symmetrical relative to the room where practical.
- Check the wall construction and choose suitable fixings.
- Check for hidden wiring and pipework before drilling.
- Plan the speaker cable route before mounting.
- Install the mounting system securely.
- Remember that each speaker weighs 6.8kg.
- Mount the loudspeakers according to Sonus faber's supplied instructions.
- Leave enough cable slack for bracket adjustment.
- Switch the amplifier off before making speaker connections.
- Observe correct positive and negative polarity.
- Aim the speakers towards the listening area.
- Begin playback at moderate volume.
- Use a centrally mixed voice to assess stereo focus.
- Adjust the speaker angles in small increments.
- Listen for excessive wall-reinforced bass.
- If using a subwoofer, integrate it only after the main speakers are correctly aimed and balanced.
Recommended Surround Setup Routine
- Decide whether the speakers will serve as side or rear surrounds.
- Plan matching left and right mounting heights.
- Check the seating positions before drilling.
- Ensure both mounting surfaces are structurally suitable.
- Plan speaker cable routes back to the AV receiver or power amplifier.
- Install the brackets and speakers securely.
- Aim the adjustable speakers towards the intended listening area.
- Check left and right polarity.
- Run the AV receiver's speaker calibration system.
- Check the measured speaker distances.
- Check surround channel levels.
- Check the bass-management crossover.
- Use film material with clear moving effects to assess surround continuity.
- Fine-tune speaker angle if the surround effect feels too diffuse or too directly localised.
Caring for Sonetto Wall G2
The cabinets use finished wood and leather surfaces and should be treated accordingly.
Avoid:
- Abrasive cleaning cloths
- Strong household detergents
- Alcohol-based cleaners
- Solvents
- Spraying liquid directly onto the cabinet
- Prolonged exposure to strong sunlight
- Mounting immediately beside strong heat sources
Product Registration
Sonus faber currently invites customers to register qualifying products within 30 days of purchase for its available extended manufacturer warranty, subject to current terms.
Who Is Sonetto Wall G2 For?
- Space-conscious stereo systems
- Sonetto G2 home cinema systems
- Side surround channels
- Rear surround channels
- Dolby Atmos systems requiring high-quality ear-level surrounds
- DTS:X systems
- Rooms where speaker stands are impractical
- Rooms where floorstanders would obstruct walkways
- Customers wanting speakers safely off the floor
- Wall-mounted two-channel systems
- Multi-room audio systems
- Living rooms
- Bedrooms
- Home offices
- Combined music and cinema rooms
- Streaming systems
- CD systems
- Turntable systems
- Systems using a subwoofer
Who Might Prefer Sonetto I G2?
Sonetto I G2 may make more sense if:
- You want deeper bass without a subwoofer
- You prefer conventional speaker stands
- You want greater freedom to experiment with speaker position
- You do not want to drill into the wall
- Stereo listening is the main priority
Who Might Prefer Sonetto II G2?
Sonetto II G2 may be better if:
- You want substantially deeper bass
- Your room has space for speaker stands
- You want greater two-channel scale
- You want to minimise reliance on a subwoofer
- A 355mm-deep cabinet is practical
Key Features
- Sonus faber Sonetto Wall G2
- Sonetto G2 Collection
- Sold individually
- On-wall loudspeaker
- Passive speaker
- Two-way design
- Sealed-box enclosure
- No reflex port
- Adjustable articulated bracket
- Wall-mount installation
- Space-saving design
- 1.1-inch tweeter
- D.A.D. Arrow Point tweeter
- Damped Apex Dome
- Extended-frequency soft dome
- Copper tweeter shorting ring
- 6.5-inch midwoofer
- Aluminium demodulation ring
- Paper-pulp sandwich cone
- Flower-patterned surround
- Asymmetric driver suspension
- 3100Hz crossover
- Phase Coherent crossover
- 60Hz–40kHz response
- 87dB sensitivity
- 4-ohm nominal impedance
- 30–200W recommended amplification
- Lute-shaped cabinet
- Wood construction
- Leather detailing
- Walnut finish
- Wenge finish
- Black finish
- 437mm height
- 271mm width
- 168mm depth
- 6.8kg weight
- Suitable for stereo
- Suitable for surround sound
- Suitable for side surrounds
- Suitable for rear surrounds
- Suitable for Dolby Atmos systems
- Suitable for DTS:X systems
- Suitable for television
- Suitable for gaming
- Suitable for multichannel music
- Suitable for multi-room audio
- Suitable for subwoofer integration
- Built as part of Sonetto G2 in Vicenza, Italy
Frequently Asked Questions
Is Sonus faber Sonetto Wall G2 still current?
Yes. It remains the current on-wall loudspeaker in the Sonetto G2 Collection.
Is Sonetto Wall G2 sold as a pair?
No. It is sold individually.
How many do I need for stereo?
Two speakers.
How many do I need for surround sound?
That depends on the system layout. A conventional 5.1 system normally uses two surround speakers, while larger 7.1 or immersive systems can require additional channels.
Is Sonetto Wall G2 designed specifically for wall mounting?
Yes.
Does it have an adjustable bracket?
Yes. Sonus faber describes an adjustable articulated mounting system that allows the speaker to be oriented towards the listening area.
Can I aim the speaker after installation?
Yes, within the adjustment provided by the mounting system.
Is Sonetto Wall G2 a sealed speaker?
Yes.
Does it have a bass-reflex port?
No. It uses a closed-box enclosure.
Why is a sealed box useful for wall mounting?
There is no rear reflex port requiring breathing space between the enclosure and the wall.
Does sealed mean it has weak bass?
No. Sonetto Wall G2 is specified down to 60Hz.
What is the frequency response?
60Hz to 40kHz.
How low does Sonetto Wall G2 play?
Sonus faber's current published lower response is 60Hz.
Does it need a subwoofer?
Not necessarily for general music listening, but a subwoofer is very useful for full-range stereo and strongly recommended for home cinema.
Can I use a subwoofer with it?
Yes.
Is Sonetto Wall G2 two-way?
Yes.
How many drivers does it use?
Two: one 6.5-inch midwoofer and one 1.1-inch tweeter.
What tweeter does it use?
A 1.1-inch D.A.D. Arrow Point extended-frequency tweeter.
What does D.A.D. stand for?
Damped Apex Dome.
What does Arrow Point do?
It controls the apex region of the soft-dome tweeter to reduce unwanted behaviour at high frequencies.
Does the tweeter use a copper shorting ring?
Yes.
How large is the midwoofer?
6.5 inches.
Does the midwoofer use an aluminium demodulation ring?
Yes.
What is the flower-patterned surround?
It is an asymmetric driver suspension developed to reduce conventional circular modes and improve dispersion and linearity.
What type of cone does it use?
Sonus faber's current Sonetto G2 information specifies paper-pulp sandwich structures for its woofers and midwoofers.
What is the crossover frequency?
3100Hz.
What is Phase Coherent crossover technology?
It is Sonus faber's approach to aligning the phase rotation of neighbouring drivers through their crossover region.
What is the sensitivity?
87dB SPL at 2.83V measured at one metre.
What is the nominal impedance?
4 ohms.
What amplifier power does Sonus faber recommend?
30 to 200 watts.
Will a 30W amplifier work?
Yes, provided it is suitable for a nominal 4-ohm loudspeaker and the room and listening levels are appropriate.
Can I use a 50W amplifier?
Yes.
Can I use a 100W amplifier?
Yes.
Can I use a 150W amplifier?
Yes.
Can I use a 200W amplifier?
Yes. That is the upper end of Sonus faber's published recommendation.
Can I use a stereo integrated amplifier?
Yes.
Can I use a streaming amplifier?
Yes.
Can I use an AV receiver?
Yes, provided it is suitable for the speaker's 4-ohm nominal impedance and complete system load.
Can I use a separate power amplifier?
Yes.
Can I use Sonetto Wall G2 as front left and right speakers?
Yes. Sonus faber specifically identifies space-saving two-channel use as one of its applications.
Can I use it as a surround speaker?
Yes.
Can I use it as a side surround?
Yes.
Can I use it as a rear surround?
Yes.
Can Sonetto Wall G2 be used in Dolby Atmos?
Yes, particularly as one of the conventional ear-level surround channels in an Atmos system.
Does Sonetto Wall G2 decode Dolby Atmos?
No. It is a passive loudspeaker. The AV receiver or processor performs the decoding.
Can it be used in DTS:X?
Yes.
Can I use it in a 5.1 system?
Yes.
Can I use it in a 7.1 system?
Yes.
What centre speaker matches Sonetto Wall G2?
Sonus faber Sonetto Centre G2 is the dedicated matching centre-channel speaker.
Can I use it with Sonetto III G2 fronts?
Yes.
Can I use it with Sonetto V G2 fronts?
Yes.
Can I use it with Sonetto VIII G2 fronts?
Yes.
Can I use it with Sonetto I or II G2?
Yes.
Can I use it with non-Sonus faber speakers?
Yes electrically, although matching speakers from the same range normally gives better tonal continuity around a multichannel system.
Should Sonetto Wall G2 be set to Small in an AV receiver?
When a capable subwoofer is available, this is normally a sensible starting point.
Does Small mean the speaker is inferior?
No. It is simply an AV bass-management setting.
Is 80Hz a sensible crossover?
Yes. It is a useful starting point with a capable subwoofer, although final settings should be determined by the room and calibration results.
Can it run full range?
Yes where the amplifier or AV configuration allows, although a subwoofer provides deeper bass extension.
Can I use Sonetto Wall G2 for stereo music?
Yes.
Is it good for vinyl?
Yes.
Is it good for streaming?
Yes.
Is it good for CD?
Yes.
Is it good for television?
Yes, as part of an AV or suitably configured stereo system.
Is it good for gaming?
Yes.
Can it be used for multichannel music?
Yes.
Can Sonetto Wall G2 be used in a multi-room system?
Yes. It is a passive speaker and requires suitable amplification and speaker wiring for each installation.
Does Sonetto Wall G2 have Bluetooth?
No. It is a passive loudspeaker.
Does it have Wi-Fi?
No.
Does it have built-in amplification?
No.
How tall is Sonetto Wall G2?
437mm.
How wide is it?
271mm.
How deep is it?
The cabinet is 168mm deep.
How much does it weigh?
6.8kg per speaker.
How large is the shipping carton?
545 x 380 x 265mm.
What is the packaged weight?
9.04kg per speaker.
Is each speaker individually boxed?
Yes.
Do I need special wall fixings?
The correct fixing depends on the wall construction. The support system must safely carry the speaker and mounting hardware.
Can I mount it on plasterboard?
Potentially, but the fixing method must be suitable for the wall structure and the installed load. Seek professional installation advice where required.
Can I mount it on brick?
Yes with appropriate masonry fixings and correct installation.
Can I mount it on a stud wall?
Potentially. The fixing arrangement must be appropriate for the structure and speaker load.
Should I use a professional installer?
It is sensible where wall construction, hidden services or cable routing are uncertain.
Do I need to leave space behind it for a port?
No. Sonetto Wall G2 uses a sealed cabinet rather than a reflex port, although the mounting system and speaker cable still require appropriate installation space.
Does wall position affect the bass?
Yes. Wall mounting creates boundary reinforcement even though the speaker itself is specifically designed for that position.
Can I mount one speaker higher than the other?
It is better to keep matching left and right speakers at consistent heights wherever practical.
Can I aim it towards the listener?
Yes. This is one of the main purposes of the adjustable articulated mounting arrangement.
What finishes are available?
Walnut Wood with Leather, Wenge Wood with Leather and Black with Leather.
Is Sonetto Wall G2 made in Italy?
It belongs to the Sonetto G2 Collection, which Sonus faber builds at its factory in Vicenza, Italy.
Does it have a lute-shaped cabinet?
Yes. Sonus faber's lute-inspired cabinet form has been redesigned for the Sonetto G2 range and adapted here for wall mounting.
What is the difference between Sonetto Wall G2 and Sonetto I G2?
Wall G2 is a shallow sealed on-wall design with a 6.5-inch midwoofer and 60Hz response, while Sonetto I G2 is a conventional front-vented bookshelf speaker using a 5-inch midwoofer and reaching to 52Hz.
What is the difference between Sonetto Wall G2 and Sonetto II G2?
Both use a 6.5-inch midwoofer and are rated at 87dB with 30–200W amplification, but Sonetto II G2 is a much deeper front-vented standmount reaching 42Hz, while Wall G2 is a 168mm-deep sealed speaker designed for installation directly on a wall.
Should I buy Sonetto Wall G2 or Sonetto II G2?
Choose Wall G2 when installation flexibility and minimal floor space are the priority. Choose Sonetto II G2 when maximum two-channel bass extension and standmount performance matter more.
Should I keep the packaging?
Yes. Each speaker has its own fitted shipping carton and protective packaging.
Should I audition Sonetto Wall G2?
Yes. Its unusual sealed on-wall format means speaker angle, mounting position, room boundaries and subwoofer integration all make worthwhile differences to the final result.
Related Sonus faber Products and Audio T Guides
Why Buy Sonus faber Sonetto Wall G2 From Audio T?
An on-wall speaker needs more planning than simply choosing a finish and connecting an amplifier. The final result depends on wall construction, mounting height, bracket angle, speaker cable routing, AV crossover settings and how the speaker integrates with the rest of the system.
Audio T can help plan a Sonetto Wall G2 installation, match it with the rest of the Sonetto G2 range, choose suitable stereo or AV amplification and integrate one or more subwoofers where deeper bass is required. We can also help decide whether Wall G2, Sonetto I G2 or Sonetto II G2 is the more suitable solution for your particular room.
- Sonus faber demonstrations
- Sonetto G2 demonstrations
- Sonetto Wall G2 system planning
- Wall-mounted stereo system advice
- Sonetto Wall G2 versus Sonetto I G2 comparisons
- Sonetto Wall G2 versus Sonetto II G2 comparisons
- AV receiver matching
- 4-ohm amplifier matching
- Stereo integrated amplifier matching
- Streaming amplifier matching
- Separate power-amplifier advice
- Speaker cable planning
- Wall-position planning
- Mounting-height guidance
- Speaker aiming and angle setup
- Side-surround planning
- Rear-surround planning
- 5.1 system planning
- 7.1 system planning
- Dolby Atmos system planning
- DTS:X system planning
- Sonetto Centre G2 matching
- Sonetto floorstander matching
- Subwoofer matching
- AV crossover setup
- Room-correction guidance
- Multi-room audio planning
- Part-exchange options
- Ongoing after-sales support
Contact your local Audio T store to discuss the Sonus faber Sonetto Wall G2, plan a wall-mounted stereo system or build a complete Sonetto G2 home cinema installation.