Audio T Verdict
The Michell T2 provides a carefully engineered and cost-effective tonearm option for customers configuring a new TecnoDec turntable.
Its low 11g effective mass, precision hand assembly and low-friction operation provide a stable platform for a suitably matched cartridge. Michell also equips it with low-capacitance wiring derived from the T8 tonearm and high-quality Neutrik RCA plugs.
As the T2 is supplied only with a new TecnoDec, Audio T can match the tonearm, cartridge and phono stage before professionally assembling and setting up the complete turntable.
Michell T2 Tonearm
The Michell T2 is an entry-level tonearm designed specifically as a factory-fit option for the Michell TecnoDec Turntable.
The latest design introduces a new arm tube, updated ergonomics and Michell's current three-point mounting system. Each tonearm is hand assembled to achieve low bearing friction and accurate cartridge tracking.
Available Only with a Michell TecnoDec
The T2 is not sold as a separate standalone tonearm. It can only be ordered as part of a new Michell TecnoDec turntable package.
Product images may show the tonearm fitted to an arm plate. The arm plate is not included with the tonearm itself.
Low-Mass Tonearm Design
Michell specifies an effective mass of 11g, placing the T2 within the low-mass tonearm category.
Cartridge compatibility depends on several factors, including:
- Cartridge weight
- Cartridge compliance
- Recommended tracking force
- Counterweight adjustment range
- Stylus profile and alignment requirements
- The connected phono stage
Audio T can recommend a suitable cartridge rather than relying on weight or compliance figures in isolation.
Precision Hand Assembly
Each T2 is individually assembled by Michell with close attention to bearing adjustment and freedom of movement.
Low tonearm friction helps the stylus follow changes in the record groove while allowing the arm to move freely across the record surface.
New Arm Tube and Three-Point Mounting
The current T2 uses Michell's latest arm-tube design and a three-point mounting system.
The mounting distance from the centre of the platter spindle to the centre of the tonearm mounting hole is 222mm.
Correct mounting geometry is essential for accurate cartridge alignment and minimising tracking error across the record.
Low-Capacitance Internal Wiring
The T2 uses wiring developed for Michell's T8 tonearm, together with a captive low-capacitance phono cable.
The cable is terminated with Neutrik RCA plugs for connection to a compatible phono stage or amplifier phono input.
Low cable capacitance is particularly relevant when matching moving magnet cartridges, whose high-frequency performance can be affected by the total capacitance of the tonearm cable and phono input.
Choosing a Cartridge
The T2 can be partnered with a suitable moving magnet, high-output moving coil or low-output moving coil cartridge, subject to mechanical and electrical compatibility.
The cartridge choice determines the required phono stage:
- Moving magnet: Requires a compatible MM phono input
- High-output moving coil: Often works with an MM input, depending on output
- Low-output moving coil: Requires a compatible MC phono stage
Browse turntable cartridges at Audio T.
Professional Cartridge Setup
Accurate setup is essential for sound quality, reliable tracking and record care.
Installation should include:
- Secure cartridge mounting
- Accurate overhang and alignment
- Tracking force adjustment
- Anti-skate adjustment
- Tonearm height assessment
- Connection of the cartridge leads
- Phono-stage gain and loading checks
Audio T can assemble and configure the complete TecnoDec, T2 and cartridge package before collection or delivery.
Key Features
- Factory-fit tonearm option for the Michell TecnoDec
- Available only when ordering a new TecnoDec
- Low 11g effective mass
- 222mm mounting distance
- New Michell arm-tube design
- Current three-point mounting system
- Precision hand assembly
- Low-friction operation
- Wiring developed for the Michell T8
- Low-capacitance captive phono cable
- High-quality Neutrik RCA plugs
- Compatible cartridge selected separately
- Phono stage required
- Professional setup recommended
Frequently Asked Questions
Can the Michell T2 be purchased separately?
No. Michell supplies the T2 only when ordering a new TecnoDec turntable.
Which Michell turntable is it designed for?
The T2 is officially specified for the Michell TecnoDec.
Is a cartridge included?
No. A compatible cartridge must be selected separately.
Is the arm plate included?
No. Michell states that product images may show an arm plate, but it is not included with the tonearm.
What is the effective mass?
Michell specifies a low effective mass of 11g.
What is the mounting distance?
The required distance from the platter centre to the tonearm mounting-hole centre is 222mm.
Does the tonearm include a phono cable?
Yes. It has a captive low-capacitance phono cable terminated with Neutrik RCA plugs.
Can it be used with a moving coil cartridge?
Potentially, subject to cartridge and tonearm compatibility. A low-output moving coil cartridge also requires an appropriate MC phono stage.
Does it have a built-in phono stage?
No. The cartridge signal must connect to a suitable external phono stage or amplifier phono input.
Can Audio T fit and align the cartridge?
Yes. Audio T can professionally assemble and configure the TecnoDec, T2 tonearm and chosen cartridge.
Related Michell Products and Guides
Why Buy From Audio T?
- TecnoDec and tonearm demonstrations
- Cartridge compatibility advice
- Professional tonearm and cartridge installation
- Tracking force and anti-skate setup
- Phono-stage matching
- Ongoing turntable support
Contact your local Audio T store to configure a Michell TecnoDec with the T2 tonearm and a suitable cartridge.