Naim Supernait 3 Amplifier & Naim NDX 2 Network Player bundle
Supernait 3
The research and developement team at Naim have over the last 6 years been working tirelessly on a range of improvements for their integrated amplifiers. The result is that now they have updated the power amplifier sections so they deliver greater pace and intimacy to your music regardless of speakers.
Supernait 3 also has a built in phono stage built around classic Naim designs with audiophile grade componentry further grouped and matched by Naim experts to deliver optimum accuracy. This circuit topolgy consists of three discrete stages, each optimised for the job at hand allowing truly excellent noise perfomance, overload headroom and extended RIAA equalisation beyond the audio band.
Naim have lavished their usual attention to detail on the design of Supernait 3 to achieve the most authentic musical performance possible. The following features all work together to deliver the best sound quality;
Class A Headphone Amplifer
ALPS Blue Velvet volume control
Reed relay input selection
Ceramic insulators for the power transistors
Galvanically Isolated microprocessor control section
Microphonic-isolating PCB mounts
Full 24V DR Naim Discrete Regulation Technology built-in
Massive toroidal mains transformer
Chassis mounted sockets hand-wired to circuit boards to enhance vibration isolation
The Naim Supernait 3 integrated amplifier makes a stunningly simple and elegant solution when partnered with one of the Naim streamers like the NDX2. Musical performance sits well above the Uniti line of products with a much lower box count than a full on Classic system plus integrating a quality turntable is now childs play using the built in phono stage. Come in-store and take a listen today!
NDX 2
The streaming section of the NDX 2 uses the latest Naim network card featuring low noise, high-speed low-voltage differential signalling (LVDS) to route the digital audio signal. The higher speed is capable of decoding all HD audio formats at up to 32 bits/384 kHz or DSD128. Rather than the source acting as the digital timing master, the new streaming board turns things around and allows the DAC clock to control the flow of audio data. The data is integer-over-sampled in a SHARC DSP to an incredible 40-bit accuracy before it’s fed to the Burr-Brown DAC.
The Burr-Brown® PCM1792A digital-to-analogue converter working alongside this new streaming platform is one of the best available. Naim improved its performance even further by implementing their own digital filters and adding a discrete current-to voltage converter immediately after the DAC.
The NDX 2 features an integrated low-noise power supply with a custom-designed toroidal transformer and separate windings for the digital and analogue sections. However, the player can be upgraded with an external XPS DR or 555 PS DR power supply, giving you a marked increase in sonic authority and emotion.
NDX 2 in common with other models from Naim offers numerous ways to listen to your music with clarity and precision.
Chromecast built-in
Apple AirPlay
TIDAL
Spotify® Connect
Bluetooth (aptX HD)
Internet Radio
UPnP™ (Universal Plug and Play)
Digital Input (Optical and Coax)
Multiroom Capable
Roon-Ready
During the development of the NDX 2, engineers examined every detail, from mechanical construction, component selection and board layout. The result is a network player worthy of the Naim badge, with a sound that’s rich, detailed and thoroughly engaging.
More Details - Register your Naim Product Today
Supernait 3
Audio Inputs
MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges
Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V
Power Amp In: DIN Socket
Audio Outputs
Powered Accessory Sockets: +24V for Naim phono amplifier
Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms
Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV, <50 ohms
Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms
Headphone Output: 1/4 inch (6.35mm) TRS Socket
Connectivity
Updates: 1 x USB mini-B
Remote Input: 1 x 3.5mm jack on rear
Finish
Case: Black powder coated
Front: Brushed and black anodised
Physical
Shipping Weight: 17.25 kg
Shipping Dimensions: 240 x 590 x 500 mm
Weight: 14 kg
Dimensions (HxWxD): 87 x 432 x 314 mm
Power
Power Consumption (max.): 400VA
Mains Supply: 115V, 230V; 50 or 60Hz
Power Consumption (quiescent): 37VA
Supplied with NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual
NDX 2
Audio Inputs
Digital (S/PDIF) - 2 x Optical TOSLink (up to 24bit/96kHz), 1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs), 1 x coaxial BNC (up to 24bit 192kHz, DoP 64Fs)
USB - 2 x USB Type A socket (front and rear - 1.6A charge)
Streaming - Chromecast built-in, Apple AirPlay, TIDAL, Spotify® Connect, Bluetooth (AptX HD), Internet Radio, UPnP™ (hi-res streaming), Roon Ready
Audio Outputs
Analogue - 1 x RCA pair 1 x 5-pin DIN
Connectivity
Network - Ethernet (10/100Mbps), WiFi (802.11 b/g/n/ac with external antennae)
Updates - Update your system wirelessly via the Naim app
Formats
Multiroom - Party Mode Streaming: Sync up to six Naim products and control via the Naim app
Audio Formats - WAV - up to 32bits/384kHz, FLAC and AIFF - up to 24bit/384Hz, ALAC (Apple Lossless) - up to 24bit/384Hz, MP3 - up to 48kHz, 320kbit (16 bit), AAC - up to 48kHz, 320kbit (16 bit), OGG and WMA - up to 48kHz (16 bit), DSD - 64 and 128Fs, M4A - up to 48kHz, 320kbit (16 bit) Note: Gapless playback supported on all formats.
Internet Radio Formats - Windows Media-formatted content, MP3, ACC, OGG Vorbis streams and MMS
Internet Radio Provider - vTuner premium 5*
Ripping and Storage
Storage - 2 x USB Type A socket (front and rear - 1.6A charge)
Power
Power Consumption Typical use: 19W Network standby mode: <2W Deep sleep: <0.5W
User Control
Handheld - Zigbee® RF4CE
App Control - Naim App for iOS and Android
Front Panel - 5" colour LCD display and four buttons
Physical
Dimensions - 87mm x 432mm x 314mm (H x W x D)
Weight - 10kg
Finishes - Brushed and anodised aluminium
Supplied with - Zigbee® remote (inc. batteries), Power-Line Lite cable (UK denominations only), Burndy link plug, 5-pin DIN interconnect cable, BNC to RCA adaptor, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guide
Upgrades
Power Supply - 555 PS DR/ XPS/ XP5 XS
Mains Cable - Power-Line
Interconnect - Super Lumina / Hi-Line