Wharfedale Diamond 12.0 Speakers
The ultra-compact speaker in the DIAMOND 12 series, the DIAMOND 12.0 features all of the same technology as its larger siblings but is designed for small-footprint hi-fi systems, or even as a high-performance, compact satellite speaker in home theatre systems.
The DIAMOND 12.0 features a high-performance 100mm (4”) KlarityTM driver with a bass performance that exceeds its diminutive footprint, while the superb 25mm (1”) woven polyester dome tweeter brings open and smoothly extended high frequencies.
The new Klarity™ cone material, formulated from a blend of Polypropylene and mica adds stiffness to reduce flexing, enabling a lightweight cone with high rigidity, low colouration and lightning-fast response.The Klarity™ cone is fitted with a low-damping surround, thereby achieving both low colouration and expressive dynamics. By simulating many different cone shapes and adding ribs to provide further stiffening, a flat response curve was achieved without resorting to a high-damping surround, thereby striking the ideal balance. A precision-made magnet system with an aluminium compensation ring to minimise the effect of variations in inductance as the voice coil travels. This contributes to an absence of distortion and intermodulation generated by the ‘motor system’.
The 25mm dome is made from a woven polyester film with a high-loss coating to deliver open and smoothly extended high frequencies. The magnet system and the front plate have been optimised for wide dispersion and uncompressed behaviour. The front plate is flat and exposes the dome as much as possible; only a very short duct on the front plate balances the acoustic load and improves the SPL (sound pressure level) measurement.
Inside the cabinet, Intelligent Spot Bracing connects opposite walls with a specific form of the wood brace to achieve an optimal reduction of cabinet resonance. These braces are precisely modelled by computer simulation to improve upon the commonplace ‘figure of eight’ brace, which may simply transfer resonance from one wall to another.
General description: 2-way bookshelf speaker
Enclosure type: bass refex
Transducer complement: 2-way
Bass driver: 4"(100mm) advanced PP Cone
Treble driver: 1"(25mm) Textile Dome
AV shield: No
Sensitivity(2.83V @ 1m): 87dB
Recommended ampli?er power: 20-60W
Peak SPL: 95dB
Nominal impedance: 8O Compatible
Minimum impedance: 4.0O
Frequency response(+/-3dB): 70Hz ~ 20kHz
Bass extension(-6dB): 65Hz
Crossover frequency: 2.7kHz
Cabinet Volume (in litres): 4.4L
Dimensions ( H x W x D ): 265 x 160 x (200+28) mm
Net weight: 5.1kg/pcs