Audio T - Naim Hi-Line interconnect
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Naim Hi-Line interconnect

Naim Hi-Line interconnect

The Hi-Line Air-PLUG (patented) is designed as a decoupling device to prevent vibrations from one product being transmitted, through the cable, to another product and to stop airborne vibrations picked up by the cable being transmitted to the products to which it is connected. The many different rear sections of the Air-PLUG are clipped together to form a lossy flexible section. The cable is clamped compliantly to the end of this flexible section. Other detail elements of the Air-PLUG include: a significantly reduced metal content to lower electromagnetic effects; a design to reduce eddy current effects and a cable clamping mechanism that does not squash the cable and affect its impedance.

The cable, exclusive to Naim, is manufactured from twisted pairs of 80 Litz conductors surrounded by PTFE, Kapton and PTFE tape all then enclosed within a semi conductive shield to reduce static charges. This is then wrapped by two spiral wound copper shields and lapped PTFE tape. Two of these assemblies side by side are then wrapped in layers of PTFE tape and finally a rubber outer covering. This gives a two-channel cable where the signal and RF grounds are held in a static position relative to each other negating any difference in field between them

This for many is the very best way to maximise the performance of a Naim Audio system.

Connectors: DIN (naim airplug) or RCA
Conductors: 2 pairs PTFE insulated 80/40awg Litz wire, Individual spiral screened
Cable Diameter Size: 9.25 x 5.30mm
Standard Length: 1.3m
Variants Available: 5-pin DIN to 5-pin DIN (standard), 5-pin DIN to RCA, RCA to 5-pin DIN, RCA to RCA, 4-pin DIN to RCA, Other Naim designed custom cable
FINISH: Colour Black