Audio T Verdict
The Rega Planar 6 RS Edition is designed for listeners who want more performance than the standard Planar 6 while retaining Rega's familiar full-width plinth and practical dustcover.
By adding the RB880 tonearm from the Planar 8, twin Reference EBLT drive belts and an upgraded CNC-machined twin-drive pulley, the RS Edition brings several higher-level Rega engineering features into a more traditional turntable design.
Three configurations are available: the Planar 6 RS with Nd9 moving magnet cartridge, the Planar 6 RS with Ania moving coil cartridge, or a complete Ania package including the Rega Fono MC phono stage.
Every version includes a factory-fitted and aligned cartridge together with the custom-matched Neo Mk2 power supply, removing much of the uncertainty from choosing and setting up a serious vinyl source.
Rega Planar 6 RS Edition Turntable
The Planar 6 RS Edition, or Rega Special, adopts several key engineering features from the next-tier Planar 8 while retaining the classic Rega form factor and smoked dustcover.
At its heart is an ultra-lightweight and highly rigid Tancast 8 foam-core plinth, finished with an aluminium metal-skin high-pressure laminate and matching edging. This construction provides a stable platform for the turntable's precision components while helping to reduce unwanted resonance.
The Planar 6 RS Edition is fitted with the precision RB880 tonearm normally found on the Planar 8. The selected cartridge is installed, aligned and checked at the factory, allowing the turntable to deliver the intended performance without the need for complicated initial cartridge setup.
A hand-tuned, low-noise 24V synchronous motor drives the aluminium sub-platter through an upgraded CNC-machined twin-drive pulley and two Rega Reference EBLT drive belts. This arrangement is designed to improve rotational stability, speed accuracy and consistency.
A custom-matched Neo Mk2 power supply is included with every configuration, providing electronic speed selection and fine speed adjustment while isolating the motor from the mains electricity supply.
Choose Your Planar 6 RS Configuration
The Rega Planar 6 RS Edition is available in three configurations. The correct option depends on whether your amplifier or existing phono stage supports moving magnet or low-output moving coil cartridges.
Rega Planar 6 RS with Nd9 Cartridge
This version includes the Rega Nd9 moving magnet cartridge, factory-fitted and aligned to the RB880 tonearm.
It is suitable for an amplifier with a built-in moving magnet phono input or a separate moving magnet phono stage.
The Nd9 configuration is the most straightforward option for anyone who wants high-performance vinyl playback without adding a moving coil phono stage.
Rega Planar 6 RS with Ania Cartridge
This version includes the Rega Ania low-output moving coil cartridge, factory-fitted and aligned to the RB880 tonearm.
It is intended for systems that already include a compatible moving coil phono stage.
The Ania cannot normally be connected directly to a conventional moving magnet phono input.
Rega Planar 6 RS with Ania Cartridge and Fono MC
This complete package includes the Rega Ania low-output moving coil cartridge and the
Rega Fono MC
phono stage.
The Ania is factory-fitted and aligned, while the Fono MC provides the gain and cartridge loading required before the signal reaches your amplifier.
The Fono MC connects to a standard line-level input marked AUX, CD, Line or similar, making this the most complete option for customers who want the Ania cartridge but do not already own a suitable moving coil phono stage.
Select your preferred configuration from the available options when ordering. Speak to your local Audio T team if you are unsure which version is compatible with your amplifier or existing phono stage.
Nd9 Moving Magnet or Ania Moving Coil?
Choose the Nd9 If You:
- Have a moving magnet phono input
- Want the simplest connection and setup
- Do not want to add a separate moving coil phono stage
- Want a high-performance factory-matched moving magnet package
Choose the Ania If You:
- Already own a compatible moving coil phono stage
- Want to move from moving magnet to moving coil playback
- Have a system capable of revealing the benefits of a low-output moving coil cartridge
- Are comfortable matching the cartridge with a suitable phono stage
Choose the Ania and Fono MC Package If You:
- Want the Ania cartridge and do not already own an MC phono stage
- Want a complete Rega moving coil playback package
- Have a spare line-level input on your amplifier
- Want the cartridge and phono stage selected to work together
Who Is the Planar 6 RS Edition For?
A Good Choice If You:
- Want to upgrade from an entry-level or mid-range turntable
- Prefer Rega's traditional full-width plinth and dustcover design
- Want the RB880 tonearm without moving up to the Planar 8
- Would like a factory-fitted and aligned cartridge
- Want a choice between moving magnet and moving coil playback
- Want a complete moving coil package with a matching phono stage
- Want a turntable with a clear future upgrade path
Consider Another Option If You:
- Need fully automatic operation
- Require built-in Bluetooth or USB recording
- Need an integrated phono stage inside the turntable
- Prefer a direct-drive turntable design
- Want to choose and fit a different cartridge yourself
Key Features
- Available in three factory-configured packages
- Rega Planar 6 RS with Nd9 moving magnet cartridge
- Rega Planar 6 RS with Ania moving coil cartridge
- Rega Planar 6 RS with Ania moving coil cartridge and Fono MC phono stage
- Selected cartridge factory-fitted and aligned
- Precision RB880 tonearm with custom stainless steel balance weight
- Upgraded CNC-machined twin-drive motor pulley
- Tancast 8 foam-core plinth with aluminium metal-skin laminate
- Dual-layer Optiwhite float-glass platter
- Custom-matched Rega Neo Mk2 turntable power supply
- Twin Rega Reference EBLT drive belts
- Hand-tuned 24V synchronous low-noise motor
- Precision aluminium sub-platter
- Rega Double Brace Technology
- Smoked dustcover supplied as standard
- Lifetime limited warranty against confirmed manufacturing defects
Frequently Asked Questions
What Rega Planar 6 RS configurations are available?
Three configurations are available: the Rega Planar 6 RS with Ania cartridge, the Rega Planar 6 RS with Ania cartridge and Fono MC phono stage, and the Rega Planar 6 RS with Nd9 cartridge.
Does every Planar 6 RS include a cartridge?
Yes. Every available configuration includes either a factory-fitted Rega Nd9 moving magnet cartridge or a factory-fitted Rega Ania moving coil cartridge.
Is the cartridge fitted and aligned at the factory?
Yes. The selected Nd9 or Ania cartridge is fitted, aligned and checked before the turntable is supplied.
Does the turntable have a built-in phono stage?
No. The turntable must be connected to a suitable external phono stage or an amplifier with the correct type of phono input.
What phono input do I need for the Nd9 cartridge?
The Rega Nd9 requires a moving magnet phono input. This may be built into your amplifier or provided by a separate moving magnet phono stage.
What phono stage do I need for the Ania cartridge?
The Rega Ania is a low-output moving coil cartridge and requires a compatible moving coil phono stage.
What is included with the Ania and Fono MC configuration?
This package includes the Planar 6 RS turntable, factory-fitted Rega Ania moving coil cartridge, custom-matched Neo Mk2 power supply and Rega Fono MC phono stage.
Where does the Fono MC connect?
The Fono MC connects to a standard line-level input on your amplifier, normally marked AUX, CD, Line or similar. It should not be connected to another phono input.
Can I buy the Ania version without the Fono MC?
Yes. The Planar 6 RS with Ania cartridge is available separately for systems that already have a suitable moving coil phono stage.
Which configuration is easiest to connect?
The Nd9 version is the simplest option if your amplifier already includes a moving magnet phono input. The Ania and Fono MC package is the simplest complete moving coil option.
Is the Neo Mk2 power supply included?
Yes. A custom-matched Rega Neo Mk2 power supply is included with all three Planar 6 RS configurations.
Can I change speed electronically?
Yes. The Neo Mk2 power supply provides electronic switching between 33? and 45 rpm without having to move the drive belt manually.
Does the turntable come with a dustcover?
Yes. A smoked dustcover is supplied as standard with every configuration.
Can Audio T help me choose the correct version?
Yes. Our store teams can help you choose between the Nd9, Ania and Ania with Fono MC configurations, check compatibility with your amplifier and explain the connection requirements.
Why Buy From Audio T?
- Specialist advice from experienced in-store teams
- Demonstrations available through your local Audio T store
- Help choosing between all three Planar 6 RS configurations
- Cartridge and phono-stage compatibility advice
- Help connecting the Fono MC to your amplifier
- Part exchange available on suitable equipment
- Ongoing support from the UK's oldest independent specialist Hi-Fi retailer
Contact your local Audio T store
to arrange a demonstration or discuss the best Rega Planar 6 RS configuration for your system.