Audio T Verdict
The Advance Paris MyConnect 60 is a remarkably complete compact music system, combining a Class A/B amplifier, CD player, network streamer, FM and DAB+ tuner, Bluetooth receiver and MM phono stage.
Its combination of Ethernet, Wi-Fi, AirPlay, Spotify Connect, USB playback and conventional analogue and digital inputs makes it easy to enjoy physical media, internet streaming and locally stored music from one manageable component.
Add a suitable pair of passive loudspeakers and the MyConnect 60 provides a flexible, engaging Hi-Fi system without requiring a full rack of separate equipment.
Advance Paris MyConnect 60 All-in-One Music System
The Advance Paris MyConnect 60 brings together the main components required for a complete modern Hi-Fi system within a compact 265mm-wide enclosure.
It incorporates a stereo Class A/B amplifier, front-loading CD player, FM and DAB+ radio tuner, wired and wireless network player, Bluetooth receiver, USB music player, digital-to-analogue converter and moving-magnet phono stage.
It is available in black or white and requires only a suitable pair of passive loudspeakers to create a complete music system.
Compact All-in-One Design
The MyConnect 60 is significantly narrower than a conventional full-width Hi-Fi component, making it useful where shelf space is limited.
Despite its compact dimensions, it includes playback options for CDs, vinyl, radio, streaming services, network music libraries, Bluetooth devices and USB memory sticks.
Additional analogue and digital inputs allow separate source equipment to be added when required.
Class A/B Amplification
The amplifier section operates in Class A/B rather than the Class D amplification commonly used by many compact systems.
Advance Paris chose this design to provide the neutrality, dynamics, detail and loudspeaker control expected from a conventional Hi-Fi amplifier.
A toroidal transformer supplies the amplifier and internal audio circuits.
Power Output
Advance Paris describes the MyConnect 60 as a 60W-per-channel amplifier when measured into a 6-ohm loudspeaker load.
The formal published ratings are:
- 48W RMS per channel into 8 ohms
- 60W per channel into 6 ohms
- 70W RMS per channel into 4 ohms
This makes it suitable for a wide selection of efficient standmount and compact floorstanding loudspeakers.
The final suitability will depend on the loudspeaker sensitivity, impedance, room size, listening distance and preferred volume.
Choose Suitable Loudspeakers
The MyConnect 60 can drive loudspeakers with a nominal impedance of 4 ohms or higher, but power figures alone do not guarantee a successful match.
An Audio T demonstration can confirm whether it provides the tonal balance, volume and bass control required by your chosen speakers.
Built-In CD Player
A front-loading CD player is integrated into the MyConnect 60.
The front panel and supplied remote provide access to playback, pause, stop, track selection and disc-eject functions.
The player is intended for conventional Compact Disc playback. SACD compatibility is not specified.
Ethernet and Wi-Fi Streaming
The MyConnect 60 can connect to a home network using either its Ethernet socket or built-in Wi-Fi connection.
A wired Ethernet connection can provide particularly reliable operation where the router is close enough to the system. Wi-Fi provides greater installation flexibility where running a network cable is impractical.
The network player can access compatible streaming services, internet radio and music stored on computers or network-attached storage devices.
Advance PlayStream App
The Advance PlayStream app is available for compatible iOS and Android devices.
It can be used to browse music, select streaming services, control playback, access internet radio and manage compatible multiroom products.
The phone or tablet and the MyConnect 60 must be connected to the same home network.
Spotify Connect
Spotify Connect allows the MyConnect 60 to be selected as a playback device from within the Spotify app.
Once playback begins, the MyConnect 60 streams the music through its own network connection rather than receiving it continuously from the phone.
A suitable Spotify account and internet connection are required.
Streaming Services
Advance Paris lists support through its streaming platform for services including Spotify, Deezer, TIDAL and Qobuz.
Internet radio services including TuneIn and iHeartRadio are also referenced by the manufacturer.
Service availability, app support and subscription requirements can change over time, so confirm continued support before purchase where a particular platform is essential.
Streaming Subscriptions Are Separate
Paid music-service subscriptions are not included with the MyConnect 60.
Maximum streaming quality and account requirements are determined by the individual service provider.
AirPlay and DLNA
The MyConnect 60 supports AirPlay playback from compatible Apple devices connected to the same network.
DLNA compatibility allows it to access suitable music libraries shared by computers, media servers and network-attached storage devices.
Available features will depend on the source device, operating system, server software and home-network configuration.
Compatible Multiroom Playback
The network platform can operate as part of a compatible Advance Paris multiroom system.
Different music can be played through suitable Advance PlayStream products in different rooms, or compatible devices can be grouped where synchronised playback is required.
Multiroom operation requires a stable home network and compatible Advance Paris products.
Built-In Bluetooth Receiver
Bluetooth reception is built into the MyConnect 60.
A compatible smartphone, tablet, computer or portable music player can be paired directly for convenient wireless playback.
Bluetooth normally operates over a relatively short range and can be affected by walls, furniture and nearby wireless equipment.
For longer listening sessions and higher-resolution playback, a network or wired connection may provide more consistent performance.
USB-A Music Playback
A front-panel USB-A connection allows compatible music files to be played from a USB memory stick or portable device.
Published file support includes:
The USB input can be controlled through the front panel, remote control or Advance PlayStream app.
File compatibility can depend on the memory-device format, file properties and installed firmware.
FM and DAB+ Radio
The built-in tuner provides both FM analogue radio and DAB or DAB+ digital radio reception.
A rear antenna connection is provided, and the supplied aerial should be positioned for the strongest available signal.
Reception quality depends on local transmitter coverage, building construction and antenna placement.
Moving-Magnet Phono Input
The AUX1 input can be switched between a normal line-level input and a moving-magnet phono input.
When set to PHONO, it allows a compatible turntable with an MM cartridge to connect directly without requiring a separate external phono stage.
Ensure that the rear-panel selector is in the correct position before use.
Check the Cartridge Type
The built-in phono stage is designed for compatible moving-magnet cartridges.
A low-output moving-coil cartridge will normally require a suitable separate phono stage connected to one of the normal AUX inputs.
Three Analogue RCA Inputs
The MyConnect 60 provides three stereo analogue RCA inputs:
- AUX1, switchable between line level and MM phono
- AUX2 line input
- AUX3 line input
The line inputs can be used with compatible CD players, network streamers, external DACs, tuners, cassette decks and other analogue source equipment.
Do not connect a digital output to an analogue RCA input.
Two Optical Digital Inputs
Two optical Toslink inputs allow compatible digital source equipment to use the MyConnect 60’s internal DAC.
Optical outputs are commonly fitted to televisions, CD players, network streamers and games consoles.
Where a television is connected, it may need to be configured for stereo PCM rather than a multichannel or bitstream output.
Coaxial Digital Input
One coaxial S/PDIF input is provided for a compatible CD transport, streamer or other digital source.
Use a purpose-designed 75-ohm coaxial digital cable rather than one half of a conventional stereo RCA interconnect pair.
PCM5101 Digital-to-Analogue Converter
The current product specification identifies the internal DAC as a Texas Instruments PCM5101.
It processes signals from the optical and coaxial digital inputs as well as supported network and USB sources.
An older Advance Paris brochure referenced a different DAC, but the current product page and operating information list the PCM5101.
Fixed or Variable Stereo Output
A stereo RCA output can be configured through the system menu for fixed-level or variable-level operation.
In variable mode, it can feed a compatible external power amplifier or active loudspeakers while following the MyConnect 60 volume control.
In fixed mode, it can feed a recorder or another component that provides its own volume control.
Check the Output Setting
Do not connect the output directly to a power amplifier while it is configured for fixed level.
Confirm the setting and reduce the volume before connecting external amplification.
Active Subwoofer Output
A mono RCA output allows a compatible active subwoofer to be added to the system.
The connected subwoofer must contain its own amplifier.
Use the subwoofer’s crossover, volume and phase controls to blend its output with the main loudspeakers and room.
Passive Loudspeaker Connections
One pair of loudspeaker binding posts is provided for conventional passive speakers.
The terminals accept properly prepared bare speaker cable and compatible connector types including banana plugs, pins and suitable spades.
Advance Paris specifies loudspeakers with an impedance of 4 ohms or higher.
Maintaining Correct Speaker Polarity
Connect the right loudspeaker to the right-channel terminals and the left loudspeaker to the left-channel terminals.
Positive on the amplifier must connect to positive on the loudspeaker, with negative connected to negative.
Reversing the polarity of one speaker can weaken central stereo imaging and reduce bass performance.
Switch the system off before changing speaker cables and ensure that no exposed strands bridge adjacent terminals.
6.35mm Headphone Output
A front-panel 6.35mm stereo headphone socket allows compatible wired headphones to be connected directly.
Reduce the volume before inserting the headphone plug and begin listening at a low level.
An adapter may be required for headphones fitted with a 3.5mm plug.
Tone and Balance Controls
The system menu provides adjustment for bass, treble, stereo balance and loudness.
These controls can help compensate for room acoustics, speaker positioning, recording balance or low-volume listening.
Begin with the tone and balance controls in their neutral positions before making adjustments.
Automatic Standby
An automatic power-down function places the MyConnect 60 into standby after approximately 30 minutes without operation.
The feature can be disabled through the system menu where required.
Firmware Updates
A rear-panel USB upgrade port is provided for firmware and service updates.
The manufacturer identifies this connection for authorised service use.
Only official update files intended specifically for the MyConnect 60 should be installed.
Black and White Finishes
The MyConnect 60 is available with either a black or white front-panel finish.
Both versions use the same compact enclosure and internal specification.
Current finish availability should be confirmed when ordering.
Installation and Ventilation
The MyConnect 60 measures 265mm wide, 136mm high and 385mm deep, with a net weight of 5.5kg.
Place it on a stable, level shelf with enough depth for the unit and its rear connections.
Do not install it inside a sealed cabinet or position it where ventilation openings are blocked.
Allow sufficient rear clearance for the Wi-Fi antenna, radio antenna, speaker cables, network cable and other connections.
Key Features
- Compact all-in-one Hi-Fi music system
- Class A/B stereo amplification
- 48W RMS per channel into 8 ohms
- 60W per channel into 6 ohms
- 70W RMS per channel into 4 ohms
- Toroidal power transformer
- Built-in front-loading CD player
- Built-in FM and DAB+ tuner
- Ethernet network connection
- Built-in Wi-Fi
- Advance PlayStream app control
- Spotify Connect
- Compatible streaming-service support
- Internet radio
- AirPlay compatibility
- DLNA network playback
- Compatible multiroom operation
- Built-in Bluetooth receiver
- USB-A music-file playback
- MP3, WAV, FLAC, ALAC and AAC USB support
- Three stereo analogue RCA inputs
- Switchable AUX1 and moving-magnet phono input
- Two optical digital inputs
- One coaxial digital input
- Texas Instruments PCM5101 DAC
- Fixed or variable stereo RCA output
- Mono active-subwoofer output
- Speaker terminals for one passive loudspeaker pair
- 4-ohm minimum loudspeaker impedance
- 6.35mm headphone output
- Bass, treble, balance and loudness adjustment
- Automatic standby
- USB firmware-update port
- Available in black or white
- Remote control included
Frequently Asked Questions
What is the Advance Paris MyConnect 60?
It is a compact all-in-one Hi-Fi system containing a stereo amplifier, CD player, network streamer, FM/DAB+ tuner, DAC, Bluetooth receiver and MM phono stage.
How powerful is it?
It delivers 48W RMS per channel into 8 ohms, 60W per channel into 6 ohms and 70W RMS per channel into 4 ohms.
What type of amplifier does it use?
It uses Class A/B amplification powered by a toroidal transformer.
Does it have a built-in CD player?
Yes. A front-loading Compact Disc player is built in.
Does it play SACDs?
SACD playback is not specified. It should be treated as a conventional CD player.
Does it have built-in music streaming?
Yes. It connects through Ethernet or Wi-Fi and can be controlled using the Advance PlayStream app.
Does it support Spotify Connect?
Yes. The MyConnect 60 can be selected directly as a playback device within the Spotify app.
Which other streaming services are supported?
Advance Paris lists services including Deezer, TIDAL, Qobuz and internet radio. Service availability and subscription requirements may change.
Does it support AirPlay?
Yes. AirPlay compatibility is documented for suitable Apple devices on the same network.
Can it play music from a NAS drive?
Yes, through a compatible DLNA or network-media server visible on the same home network.
Does it have built-in Bluetooth?
Yes. A Bluetooth receiver is integrated into the MyConnect 60.
Does it have DAB+ and FM radio?
Yes. Both FM and DAB/DAB+ radio tuners are built in.
Can I connect a turntable?
Yes. The AUX1 input can be switched to a moving-magnet phono setting.
Can I use a moving-coil cartridge?
A low-output moving-coil cartridge will normally require a suitable external phono stage connected to one of the normal analogue inputs.
How many analogue inputs does it have?
It has three stereo RCA inputs: AUX1/PHONO, AUX2 and AUX3.
How many digital inputs does it have?
It provides two optical Toslink inputs and one coaxial S/PDIF input.
What DAC does it use?
The current specification identifies a Texas Instruments PCM5101 DAC.
Can it play music from a USB memory stick?
Yes. Supported formats include MP3, WAV, FLAC, ALAC and AAC.
Can I connect an external power amplifier?
Yes. The stereo RCA output can be configured for variable operation so that it follows the MyConnect 60 volume control.
Can the output also be fixed?
Yes. It can be set to fixed or variable level through the system menu.
Can I connect a subwoofer?
Yes. One compatible active subwoofer can be connected through the mono RCA subwoofer output.
How many pairs of loudspeakers can it power?
It provides terminals for one conventional stereo pair of passive loudspeakers.
What loudspeaker impedance is required?
Advance Paris specifies loudspeakers with an impedance of 4 ohms or higher.
Does it have a headphone output?
Yes. A 6.35mm stereo headphone socket is provided on the front panel.
Is it available in different colours?
Yes. Black and white versions are available.
How large is it?
It measures 265mm wide, 136mm high and 385mm deep.
How much does it weigh?
The published net weight is 5.5kg.
Related Advance Paris Products and Audio T Guides
Why Buy From Audio T?
- Independent advice from experienced Hi-Fi specialists
- MyConnect 60 and loudspeaker system matching
- In-store demonstrations at participating branches
- Home network and streaming setup guidance
- Turntable and moving-magnet cartridge advice
- DAB, FM and antenna setup support
- Subwoofer selection and integration advice
- Speaker-cable and interconnect recommendations
- Click and Reserve from participating stores
- Nationwide UK delivery on eligible products
- Ongoing after-sales support
Contact your local Audio T store to arrange a demonstration or discuss matching the Advance Paris MyConnect 60 with your loudspeakers, turntable and home network.