Sonus Faber Electa Amator III Speakers
The cabinet harmoniously combines; solid walnut wood that becomes an integral body with the Carrara marble base, through a brass insert that illuminates the lines and enhances each material.
The third generation of an iconic product generated by an expression of natural evolution, withholding the elements that make us unique: precious materials, high craftsmanship and natural sound.
The cabinet harmoniously combines; solid walnut wood that becomes an integral body with the Carrara marble base, through a brass insert that illuminates the lines and enhances each material.
The combination is a recurring characteristic of Sonus faber creations derived from their designers’ will to allow the most heterogeneous mechanical behavior possible from each product, for the benefit of the naturalness of the sound.
Hand-applied leather envelopes the rear panel and front baffle which houses the Voice of Sonus faber while dedicated black anodised aluminum columns, filled with damping material and mounted on a Carrara marble base, provide loudspeaker support.
Aluminium and marble are separated by a thin brass sheet, within the speaker cabinet.
Electa Amator III is a 2-way bookshelf loudspeaker system; a simple project that features main technologies and design solutions, already used for the last Sonus faber creations:
Features
TWEETER
A 28 mm tweeter featuring the DAD™ – Damped Apex Dome™ technology, with the tripod that recalls the peculiarity of its predecessor.
MIDWOOFER
A 6.5 inches mid-woofer specifically developed for this special project, features the classic cellulose pulp cone.
A GLANCE INSIDE
Through the Reflex port let’s have a glance to the solid wood rear acoustic chamber of the tweeter.
MATERIALS
The cabinet harmoniously combines; solid walnut wood that becomes an integral body with the Carrara marble base, through a brass insert that illuminates the lines and enhances each material.
Hand-applied leather envelopes the rear panel and front baffle which houses the Voice of Sonus faber.
THE STAND
Dedicated black anodised aluminum columns, filled with damping material and mounted on a Carrara marble base, provide loudspeaker support.
Aluminium and marble are separated by a thin brass strip, consistent with the speaker cabinet.
SYSTEM
2-way bookshelf/standmount vented loudspeaker system
CROSSOVER
2500Hz
FREQUENCY RESPONSE
40 Hz – 35.000 Hz
SENSITIVITY
88 dB SPL (2,83V/1 m)
NOMINAL IMPEDANCE
4 ohm
SUGGESTED AMPLIFIER POWER OUTPUT
35 – 125 W, without clipping
SPEAKERS DIMENSIONS (HXWXD) & WEIGHT
375 x 235 x 360 mm 14,8 x 9,3 x 14,2 in 14,6 Kg ea – net weight 32,2 lb ea – net weight
STAND DIMENSIONS (HXWXD) & WEIGHT
720 x 300 x 350 mm 28.4 x 11.8 x 13.8 in 11,2 Kg ea – net weight 24,7 lb ea – net weight