Audio T Verdict
If you are using an Era 100 as a rear surround speaker or building a proper stereo pair, putting the speakers in the right place matters almost as much as choosing the speakers themselves. The Sonos Era 100 Stand provides a simple purpose-built solution, lifting the speaker away from furniture and holding it at a fixed height suitable for seated listening and home cinema surround use.
It is more considered than simply placing the speaker on top of a generic floor stand. Era 100 is screwed securely to the platform, the substantial base helps keep everything stable and the power cable runs through a dedicated channel in the stand pole rather than hanging visibly down the back.
The matching Black and White finishes also make the finished installation look like one complete Sonos system. For a single Era 100 it provides useful placement freedom; for a stereo pair or rear-surround system, two stands make it considerably easier to achieve consistent speaker height and positioning on both sides of the room.
Sonos Era 100 Speaker Stand
The Sonos Era 100 Stand is a purpose-designed fixed-height floor stand for the Sonos Era 100 and Era 100 SL wireless speakers.
Rather than relying on existing furniture to determine where your speakers can be positioned, the stand allows Era 100 to be placed more freely within the room, whether it is being used for everyday music, as part of a stereo pair or as a rear surround speaker in a compatible Sonos home cinema system.
- Purpose-designed for Sonos Era 100
- Also compatible with Sonos Era 100 SL
- Fixed-height floor stand
- Designed for seated listening
- Ideal for stereo speaker placement
- Ideal for home cinema rear surrounds
- Speaker screws securely to the stand
- Stable weighted base
- Integrated power-cable management
- Cable channel built into stand pole
- Maintains access to Era 100 ports and controls
- Colour matched to Sonos Era 100
- Available in Black or White
- 910mm stand height
- 4.55kg stand weight
- Simple assembly
- Assembly hardware supplied
- Speaker sold separately
Why Put Era 100 on a Dedicated Stand?
One of the advantages of a compact wireless speaker is that it can be placed almost anywhere, but that convenience can also result in the speaker ending up wherever there happens to be a spare piece of furniture.
A bookshelf might be too low, a sideboard might be too far forward and a bedside table may simply be on the wrong side of the room.
The Era 100 Stand removes furniture placement from the equation and allows the speaker to be positioned where it makes more sense acoustically.
Designed for Seated Listening Height
The stand uses a fixed 910mm height rather than an adjustable pole.
Sonos designed this height to position Era 100 appropriately for seated listening and home cinema surround applications.
That is particularly useful when a pair is positioned behind a sofa, where placing one speaker on a tall cabinet and the other on a low table would create an uneven surround presentation.
Why Speaker Height Matters
Where a speaker sits vertically changes the relationship between its drivers and the listener.
For normal seated listening, positioning compact speakers at a sensible height helps maintain a more direct relationship between the speaker and your ears rather than asking sound to arrive predominantly from floor or ceiling level.
With rear surrounds, keeping the left and right speakers at matching heights also helps create a more consistent surround field.
Match the Height of a Stereo or Surround Pair
If you are using two Era 100 speakers together, use matching stands or equivalent matching positions wherever possible. Consistent left and right placement gives Trueplay and the Sonos system a much better starting point than two speakers positioned at completely different heights.
Excellent for an Era 100 Stereo Pair
Two Era 100 speakers can be configured within the Sonos app as a dedicated left and right stereo pair.
Although one Era 100 already creates stereo information through its two angled tweeters, separating the left and right channels into two physical speakers produces a much wider and more conventional stereo soundstage.
A pair of Era 100 Stands gives you much greater flexibility when choosing that left and right speaker position.
Move the Speakers Away From Furniture
A dedicated floor stand means you no longer have to accept the spacing dictated by a television cabinet, sideboard or shelving unit.
The speakers can instead be moved further apart or positioned more symmetrically around the normal listening area.
This can be particularly valuable in rooms where the furniture is positioned for practical reasons rather than ideal stereo reproduction.
Recommended Stereo Placement
For a stereo pair, place the two Era 100 speakers so that they create a sensible left and right relationship around the main listening area.
Sonos suggests roughly 2.5 to 3 metres between a stereo pair in a larger room, with the principal listening position approximately 2.5 to 3.5 metres away, although smaller rooms will naturally require closer spacing.
Trueplay can then be used to compensate for the acoustic effect of the room once the speakers are in their final positions.
Ideal for Rear Surround Speakers
The stand is especially useful when two Era 100 speakers are being used as dedicated surrounds with a compatible Sonos soundbar.
Instead of balancing speakers on furniture behind the sofa, a pair of stands gives each rear channel a secure and consistent position.
Sonos specifically describes the fixed stand height as being optimised for home cinema surrounds.
Era 100 With Sonos Arc Ultra
A pair of Era 100 speakers can be configured as rear surrounds with the Sonos Arc Ultra Dolby Atmos Soundbar.
Arc Ultra handles the front and spatial soundstage while the Era 100 pair places genuine physical surround speakers behind the listening position.
Dedicated stands make this particularly useful in rooms where there is no conveniently positioned shelf or side table behind the sofa.
Era 100 With Sonos Beam
Era 100 also makes an excellent rear speaker for the compact Sonos Beam (Gen 2).
The combination keeps the system visually discreet while providing a considerably more enveloping home cinema presentation than using the soundbar alone.
Era 100 With Sonos Ray
A pair of Era 100 speakers can also be used as rear surrounds with compatible Sonos Ray systems.
This provides a straightforward route from a simple soundbar installation to a more complete wireless surround system.
Era 100 With Sonos Amp
Era 100 can additionally form part of supported Sonos Amp home cinema configurations.
This can be useful where Sonos Amp is powering conventional passive front speakers while Era 100 speakers provide wireless surround channels at the back of the room.
Why Physical Surround Speakers Matter
Modern soundbars can create remarkably wide and immersive sound from the front of a room, but a physical speaker behind the listener remains the most direct way of producing sound from behind the listener.
Dedicated Era 100 surrounds can therefore add greater movement and localisation to effects that travel around a film or television soundtrack.
Fixed Rather Than Height Adjustable
The official Sonos Era 100 Stand is not height adjustable.
Its height has been chosen specifically for the speaker rather than asking the user to decide where to set an extendable pole.
This also means a pair of stands will naturally place both speakers at exactly the same height.
Fixed Height Keeps a Pair Consistent
There is no height adjustment to set incorrectly between the left and right stands. Assemble both stands correctly and your speakers automatically sit at the same height.
Secure Screw-Fixed Speaker Mounting
Era 100 does not simply rest loosely on the top of the stand.
The speaker platform is specifically shaped for the speaker and the supplied mounting hardware secures Era 100 directly to it.
This reduces the possibility of the speaker being accidentally knocked or slid from the top platform during normal use.
Secure the Speaker With the Supplied Screw
Do not simply place Era 100 on top of the assembled stand without fastening it. The stand is designed for the speaker to be secured to its platform using the supplied mounting screw.
Purpose-Designed Speaker Platform
The top platform has been designed around the base of Era 100 rather than using a generic rectangular speaker shelf.
This helps the stand appear visually integrated with the speaker and keeps the overall footprint around the cabinet relatively discreet.
Maintains Access to Connections
The design keeps the rear of the speaker accessible so normal connections and controls remain usable once Era 100 has been mounted.
This includes access to the mains connection and rear controls.
Built-In Power Cable Management
One of the most useful details is the dedicated cable channel running through the stand pole.
During assembly, the Era 100 power cable is fed through the opening in the base and then routed through the channel in the pole.
The cable can therefore remain closely integrated with the stand rather than hanging loosely from the back of the speaker to the floor.
Cleaner Installation
Cable management becomes particularly important when a speaker is positioned away from a wall or piece of furniture.
Without it, the mains lead can become the most visually obvious part of the installation.
Routing the cable neatly down the pole keeps the stand and speaker looking much more like one complete product.
The Era 100 Power Cable Is Used
The stand does not provide its own electrical connection.
You use the normal mains cable supplied with Era 100 and route that cable through the stand during assembly.
Make sure the mains socket is within suitable reach before deciding on the final stand position.
Plan Power Before Positioning Surrounds
Unlike passive rear speakers connected back to an AV amplifier with speaker cable, each Era 100 needs its own mains supply.
When planning a pair of rear stands, check where the available wall sockets are before deciding exactly where the speakers will go.
Wireless Audio Still Needs Mains Power
Era 100 receives surround and music audio wirelessly, but it is not battery powered. Each speaker requires a nearby mains connection, so include power-socket position in your surround-system planning.
Weighted Base
The stand uses a substantial base to provide stability at floor level.
At approximately 4.55kg for the stand itself, it has significantly more mass than the Era 100 speaker, helping keep the centre of gravity low.
This is especially useful where the stand is positioned beside or behind seating and may occasionally be brushed past.
Why a Stable Base Matters
A tall, narrow speaker support needs enough stability to resist ordinary knocks and vibration.
The broad, weighted base provides a more secure foundation than trying to improvise with a lightweight pedestal or narrow piece of furniture.
It Is Stable, Not Impossible to Knock Over
Always position the stand where it is unlikely to be walked into, pulled by a child or caught by a pet. No freestanding speaker support can be made completely immune to being tipped if enough force is applied.
Helps Isolate the Speaker From Furniture
Moving Era 100 from a resonant shelf, lightweight table or cabinet onto a dedicated floor stand also changes the mechanical relationship between the speaker and the room.
The speaker is no longer directly exciting the panel beneath it, which can help reduce unwanted rattles or vibration from surrounding furniture.
Trueplay can then tune the speaker once its final position has been established.
Useful in Rooms With Limited Furniture
Minimalist rooms can actually be difficult places to install rear speakers because there may be no furniture behind the sofa at all.
A floor stand provides the required support without adding a cabinet, shelf or table solely to hold the speaker.
Saves Surface Space
Even where furniture is available, placing Era 100 on a stand keeps that surface free for other things.
A side table can remain a side table rather than becoming permanent speaker furniture, while a bookshelf can continue to hold books rather than having to accommodate a speaker and mains cable.
Colour Matched to Era 100
The official stand is designed to visually complement Sonos Era 100 rather than look like a generic aftermarket accessory.
Black and White options allow the stand to match the corresponding speaker finish and create a consistent floor-to-speaker appearance.
Black or White
Choose:
- Black: Designed to complement Black Era 100 and Era 100 SL
- White: Designed to complement White Era 100 and Era 100 SL
Nothing prevents contrasting finishes if that suits the room, but most installations will look more integrated when the speaker and stand match.
Compatible With Era 100 SL
Sonos' current accessory listing specifies compatibility with both Era 100 and Era 100 SL.
The two models share the relevant physical form factor, allowing the current Era 100 Stand to be used with either version.
Not a Universal Sonos Speaker Stand
The Era 100 Stand is specifically designed around the Era 100 family.
It should not be assumed to fit:
- Era 300
- Sonos Five
- Move 2
- Older Sonos One / One SL
- Other third-party speakers
Those products require their own appropriate stands or mounting solutions.
Use the Correct Stand for the Speaker
The mounting platform and fixing arrangement are designed for Era 100 and Era 100 SL. Do not attempt to adapt the stand for a different speaker simply because its cabinet appears to fit on top.
Era 100 Stand or Era 100 Wall Mount?
Sonos also offers a dedicated Era 100 Wall Mount, so there are two different approaches to getting the speaker away from furniture.
Era 100 Stand
- Freestanding installation
- No drilling into walls
- Easier to reposition later
- Fixed listening height
- Weighted floor base
- Ideal beside or behind sofas
- Integrated cable routing
Era 100 Wall Mount
- Fixes speaker directly to wall
- Keeps floor completely clear
- Useful where floor space is limited
- Requires suitable wall fixing
- Useful for permanent installations
- Allows flexible speaker positioning
- Dedicated cable-routing provision
Which Is Better for Rear Surrounds?
That depends almost entirely on the room.
If the sofa is away from the rear wall, stands often provide the easiest way of placing the surround speakers reasonably close to the listening position.
If the sofa sits directly against a wall or floor space is very limited, wall mounting may be neater.
Stands Are Easier to Reposition
One advantage of a floor stand is that positioning is not permanent.
You can experiment with the location of your Era 100 speakers, carry out Trueplay, listen and move them again if necessary.
This can be useful when finding the best compromise between sound, furniture and everyday movement around the room.
No Holes in the Wall
A floor stand avoids drilling and wall fixings entirely.
That makes it useful in rented accommodation or rooms where the speaker position may change in future.
Easy Assembly
Sonos designed the Era 100 Stand for straightforward home assembly.
Each stand includes:
- One stand base
- One stand pole
- One speaker platform
- One stand pole cap
- Two long assembly screws
- One short speaker mounting screw
- One washer
The Era 100 speaker itself is not included.
What Tool Do I Need?
Sonos specifies a Phillips-head screwdriver for assembly.
No specialist installation equipment should be required for the stand itself.
How to Assemble the Sonos Era 100 Stand
- Unpack the stand components and hardware.
- Place the base securely while assembling the stand.
- Feed the Era 100 power cable through the opening in the stand base.
- Route the cable towards the channel in the pole.
- Position the supplied washer correctly against the base.
- Align the stand pole with the base using the locating points.
- Secure the pole to the base using one of the supplied long screws.
- Make sure the power cable can still move freely.
- Position the speaker platform on the top of the pole.
- Secure the platform using the second long screw.
- Bring the power cable up to the speaker position.
- Connect the mains cable to Era 100.
- Press the remaining cable neatly into the pole channel.
- Place Era 100 onto the speaker platform.
- Secure the speaker using the supplied short mounting screw.
- Position the assembled stand in its final location.
- Check that the base is sitting flat and stable before use.
Route the Cable During Assembly
Feed the Era 100 power cable through the stand as instructed while assembling it. Doing this from the beginning is considerably easier than trying to reroute the cable after the speaker and platform have already been secured.
Speaker Sold Separately
The product is the floor stand and its assembly hardware only.
A Sonos Era 100 or Era 100 SL speaker must be purchased separately unless you already own one.
One Stand or a Pair?
The Audio T product page is for an individual Era 100 Stand.
One stand makes sense for a single speaker used in a bedroom, kitchen, office or other standalone room.
For a stereo pair or home cinema surrounds, you will normally require two stands.
One Stand
- For one Era 100 or Era 100 SL
- Useful for standalone room audio
- Allows independent speaker placement
- Saves furniture space
- Speaker sold separately
Two Stands
- Ideal for Era 100 stereo pairs
- Ideal for rear surrounds
- Matching left and right height
- Consistent visual finish
- Allows symmetrical positioning
Official Sonos Pair Option
Sonos also sells the Era 100 Stand as an official pair package.
This is specifically intended for stereo and surround applications where both speakers need matching supports.
Use With Trueplay
Once Era 100 has been installed on the stand and positioned where you intend to use it, run Trueplay room tuning.
Moving a speaker from a shelf to a freestanding position can change its interaction with walls and surrounding furniture, so recalibrating after the move is worthwhile.
Quick Trueplay Tuning
Era 100 supports Quick Trueplay Tuning using its built-in microphones on compatible iOS and Android devices.
This makes it relatively simple to retune after moving the stand or experimenting with a new position.
Advanced Trueplay
Compatible iOS users can also use Advanced Trueplay Tuning for a more detailed measurement across the listening area.
For a newly positioned stereo pair, this can be particularly worthwhile once the final speaker spacing has been chosen.
Don't Trueplay Before You Finish Moving Things
If you are still experimenting with stand positions, there is little point carrying out the final detailed Trueplay process after every tiny movement.
Find a sensible physical arrangement first, then tune the system once the speakers are where they are likely to remain.
Position First, Tune Second
Good room correction starts with sensible speaker placement. Use the stands to get the speakers where you want them, then use Trueplay to make the final acoustic adjustment for the room.
Recommended Placement for Surround Use
For home cinema surrounds, position the two stands behind or towards the rear sides of the normal seating position where the room allows.
Try to maintain similar distances and angles on the left and right rather than placing one speaker directly beside the listener and the other several metres away.
Sonos recommends leaving approximately 203mm of clear space around Era 100 when used as a surround speaker.
Don't Block the Speaker
Avoid placing the stand so that a large sofa back, curtain or piece of furniture completely obstructs the front and side acoustic output from Era 100.
The advantage of a dedicated stand is that the speaker can usually be positioned above or clear of much of the surrounding furniture.
Allow Access to the Controls
The stand keeps the top of Era 100 accessible so its capacitive controls can still be used.
This can be particularly useful when the speaker is being used on its own or as part of a stereo pair.
Floor Surface and Stability
Place the stand on a firm, level section of floor.
If the floor is uneven, make sure the stand does not rock or lean before attaching the speaker and putting the system into everyday use.
Avoid High-Traffic Areas
Where possible, do not position the stand directly in a doorway or narrow route through the room.
The weighted base improves stability, but sensible placement remains the best protection against accidental knocks.
Consider Children and Pets
Any freestanding loudspeaker can attract unwanted attention from children and pets.
The Era 100 Stand secures the speaker to the platform and provides a substantial base, but if the position is especially vulnerable then wall mounting may provide the safer long-term installation.
Stand Height
The Sonos Era 100 Stand measures approximately 910mm high.
This is the fixed stand height and cannot be telescopically raised or lowered.
Stand Weight
The stand itself weighs approximately 4.55kg.
The relatively substantial mass is concentrated in a design intended to provide a stable support for the much smaller Era 100 speaker above it.
Era 100 Speaker Dimensions
For context, the Era 100 speaker itself measures approximately:
- Height: 182.5mm
- Width: 120mm
- Depth: 130.5mm
- Weight: 2.02kg
Once fitted, the speaker sits securely on the purpose-designed top platform rather than requiring a larger generic shelf.
A Complete Era 100 Installation
The stand is one of several official mounting options designed around Era 100.
Depending on the room, you can choose between:
- Furniture placement
- Era 100 floor stand
- Era 100 wall mount
- A compatible third-party purpose-designed stand
The best option is the one that places the speaker correctly without interfering with how the room is used.
When the Official Stand Makes Most Sense
The Sonos Era 100 Stand is particularly useful when:
- You have no furniture in the correct speaker position
- You want to create a properly spaced stereo pair
- You are installing two Era 100 rear surrounds
- You do not want to drill into a wall
- You may reposition the speakers later
- You want the stand finish to match the speaker
- You want the speaker physically secured rather than resting loosely on a generic platform
- You want built-in power-cable management
Recommended Era 100 Stand Setup Routine
- Choose whether you need one stand or a matching pair.
- Select the Black or White finish to suit your Era 100 or room.
- Check that suitable mains power is available near the proposed position.
- Assemble the stand using a Phillips-head screwdriver and the supplied hardware.
- Route the Era 100 power cable through the base and pole during assembly.
- Secure the speaker platform to the stand pole.
- Connect the power cable to Era 100.
- Press the cable neatly into the stand's cable channel.
- Attach Era 100 securely to the platform using the supplied mounting screw.
- Place the stand on a stable, level surface.
- For stereo use, position the second speaker at a matching distance and height.
- For surround use, position the pair behind or towards the rear sides of the seating area.
- Check that neither speaker is obstructed by furniture.
- Make sure the stands do not create a trip hazard.
- Reconnect or confirm Era 100 operation within the Sonos app.
- Run Trueplay once the speaker positions are final.
- Listen from the normal seating area and fine-tune placement if required.
Key Features
- Sonos Era 100 Stand
- Purpose-designed floor stand
- Sonos Era 100 compatible
- Sonos Era 100 SL compatible
- Fixed-height design
- Designed for seated listening
- Optimised for home cinema surrounds
- Ideal for stereo pairs
- Ideal for rear surrounds
- Single-speaker installation
- Pair installation possible
- Secure screw-fixed speaker mounting
- Purpose-designed top platform
- Stable floor base
- Weighted base
- Built-in cable channel
- Concealed power-cable routing
- Maintains access to speaker controls
- Simple assembly
- Assembly hardware included
- Phillips screwdriver required
- Black finish
- White finish
- Colour matched to Era 100
- 910mm stand height
- 4.55kg stand weight
- No height adjustment
- No wall drilling required
- Easy to reposition
- Useful for Trueplay optimisation
- Speaker sold separately
Frequently Asked Questions
Is the Sonos Era 100 Stand still current?
Yes. Sonos continues to offer the Era 100 Stand as a current accessory.
Which speakers fit the Era 100 Stand?
Sonos currently specifies compatibility with Era 100 and Era 100 SL.
Does the Era 100 speaker come with the stand?
No. The speaker is sold separately.
Is this one stand or a pair?
This Audio T product is an individual stand. Two stands are normally required for a stereo pair or matching rear surrounds.
Does Sonos sell the stands as a pair?
Yes. Sonos also offers an official Era 100 Stand pair package.
How tall is the Era 100 Stand?
Approximately 910mm.
Can I adjust the stand height?
No. It uses a fixed-height design.
Why is the height fixed?
Sonos designed the stand at a height suitable for seated listening and home cinema surround use, while a fixed design also ensures a matching pair sits at exactly the same height.
How much does the stand weigh?
Approximately 4.55kg.
Does the speaker just sit on top?
No. Era 100 is secured to the speaker platform using the supplied mounting screw.
Is the stand stable?
It uses a substantial weighted base intended to provide a stable floor support for Era 100.
Can the power cable be hidden?
The stand incorporates a channel in the pole for neat power-cable management.
Does the stand include a separate power cable?
No. Route the standard Era 100 power cable through the stand during assembly.
Does Era 100 still need a mains socket?
Yes. Era 100 is mains powered even though its audio connection is wireless.
Can I use the stand with Era 100 SL?
Yes. Sonos' current product listing specifically includes Era 100 SL compatibility.
Can I use it with Era 300?
No. Era 300 has its own dedicated stand.
Can I use it with Sonos One?
It is specifically designed for the Era 100 family rather than older Sonos One models.
Can I use it with a different brand of speaker?
No. The platform and secure mounting arrangement are purpose-designed for Era 100 and Era 100 SL.
Is the stand good for stereo listening?
Yes. A pair allows two Era 100 speakers to be positioned at matching heights and spaced more freely than furniture may allow.
Is it designed for surround speakers?
Yes. Sonos specifically describes the fixed height as optimal for home cinema surrounds.
Can I use Era 100 stands behind my sofa?
Yes, providing there is enough room for the base, access to mains power and a safe position where the stands are unlikely to be knocked.
Can I use two Era 100 speakers with Arc Ultra?
Yes. A compatible pair can be configured as rear surrounds with Sonos Arc Ultra.
Can I use them with Beam?
Yes. Era 100 can form a compatible rear-surround pair with Sonos Beam.
Can I use them with Ray?
Yes, in compatible Sonos surround configurations.
Can I use Era 100 surrounds with Sonos Amp?
Era 100 can be used in supported Sonos Amp home cinema arrangements.
Should the rear surrounds be directly behind me?
Positioning depends on the room, but placing the pair behind or towards the rear sides of the listening area generally gives the surround channels a useful physical relationship with the seating position.
How much space should I leave around Era 100?
Sonos recommends approximately 203mm of clearance around Era 100 when it is being used as a surround speaker.
Should I run Trueplay after putting Era 100 on the stand?
Yes. Moving the speaker from furniture to a new floor-standing position changes its relationship with the room, so running Trueplay after final positioning is worthwhile.
Can Android users run Trueplay on Era 100?
Yes. Era 100 supports Quick Trueplay Tuning using its own microphones with compatible iOS and Android devices.
What tools do I need to assemble the stand?
Sonos specifies a Phillips-head screwdriver.
Does assembly hardware come in the box?
Yes. The stand includes the base, pole, platform, pole cap, washer and required mounting screws.
How many screws are included?
Sonos specifies three screws: two longer stand-assembly screws and one shorter speaker-mounting screw.
Is assembly difficult?
Sonos describes the stand as easy to assemble. The important part is routing the Era 100 power cable correctly during the assembly process.
Can I move the stand once it is assembled?
Yes, although lift and reposition it carefully rather than dragging the weighted base across the floor.
Is the stand better than the wall mount?
Neither is automatically better. The stand is easier to reposition and requires no drilling, while the wall mount keeps the floor clear and may suit rooms where there is no safe space for a stand.
Can the stand damage my floor?
As with any substantial floor-standing product, make sure the base and floor surface are clean before positioning it and take appropriate precautions with delicate flooring.
What colours are available?
Black and White.
Should I match the stand colour to the speaker?
That is a matter of taste, although matching Black with Black or White with White creates the most visually integrated appearance.
Can I put the stand outdoors?
No. Era 100 and its stand are intended for indoor use rather than permanent exposure to outdoor weather.
Is this stand suitable for homes with children or pets?
The weighted base and secure speaker fixing improve stability, but any freestanding speaker can still be knocked over. Position it away from vulnerable high-traffic areas where possible.
Related Sonos Products
Why Buy the Sonos Era 100 Stand From Audio T?
Speaker stands may appear simple, but where you put the speakers can make a considerable difference to both stereo listening and surround sound. Audio T can help work out whether floor stands, wall mounts or furniture placement make most sense for your room before you start moving sofas or drilling holes.
We can also demonstrate Era 100 as a single speaker, stereo pair or part of a complete Sonos home cinema system, helping you decide whether one stand, a pair of stands or an alternative mounting solution is the most practical option.
- In-store Sonos demonstrations
- Era 100 demonstrations
- Stereo pair demonstrations
- Surround speaker demonstrations
- Speaker positioning advice
- Floor stand versus wall mount guidance
- Arc Ultra system planning
- Beam home cinema planning
- Surround speaker positioning
- Trueplay setup guidance
- Power and cable-routing advice
- Sonos multi-room planning
- Subwoofer matching
- System expansion advice
- Ongoing after-sales support
Contact your local Audio T store for help positioning Era 100 speakers, planning a stereo pair or creating a complete Sonos wireless surround system.