Audio T Verdict
The Bowers & Wilkins FS-700 S3 stands provide the 705 S3, 706 S3 and 707 S3 with a rigid, stable and correctly proportioned support.
The compatible speakers can be secured directly to the top plates, while the central columns can be mass loaded with dry sand to increase stability and help control unwanted resonance.
Internal cable routing creates a cleaner installation, while supplied spikes and alternative floor feet accommodate different surfaces. Correct assembly, levelling and speaker fixing remain essential.
Bowers & Wilkins FS-700 S3 Speaker Stands
The FS-700 S3 is the dedicated speaker stand for the standmount models in the Bowers & Wilkins 700 Series S3 range.
It is designed for the 705 S3, 706 S3 and 707 S3, with model-specific fixing hardware allowing the compatible speaker to be secured directly to the stand’s top plate.
The stands are supplied as a pair and are available in black and silver finishes.
Designed for the 700 Series S3
The dimensions and mounting arrangement of the FS-700 S3 have been developed specifically around the three standmount models in the 700 Series S3 range.
The stand provides a broader and more stable footprint than placing the speakers on furniture, while raising their tweeters closer to seated ear height.
Its materials, proportions and finish options are also intended to create a visually consistent match with the premium construction of the 700 Series speakers.
Compatible Bowers & Wilkins Speakers
Compatibility with older 700 Series models or speakers from other manufacturers should not be assumed, as their dimensions and fixing points may differ.
Model-Specific Speaker Fixing
The compatible speaker can be secured directly to the stand using the appropriate supplied fixing hardware.
Different fixings are provided for the larger 705 S3 and 706 S3 cabinets and the more compact 707 S3.
Securing the cabinet to the top plate provides a more stable mechanical connection than simply placing the speaker on an unsecured platform.
This helps prevent accidental movement while supporting clear bass, precise stereo imaging and consistent performance.
Use the Correct Fixings
Follow the assembly instructions for the specific speaker model being installed.
Use only the appropriate supplied hardware and do not overtighten the fixing bolts, as excessive force could damage the speaker cabinet or its threaded mounting points.
625mm Stand Height
Each FS-700 S3 measures 625mm high before the floor spikes are fitted.
The overall height increases to approximately 660mm when the supplied spikes are installed.
This positions the compatible speaker away from nearby furniture and brings its high-frequency driver closer to seated ear level.
The final tweeter height will vary between the 705 S3, 706 S3 and 707 S3 because their cabinets are different sizes.
Stable 290mm by 315mm Base
The base of each stand measures 290mm wide and 315mm deep.
This provides a substantial footprint for the 700 Series standmount speakers while retaining an elegant appearance.
The complete footprint should be checked before ordering, particularly where the stands will be placed near furniture, doors or frequently used walkways.
Mass-Loadable Central Column
The central column can be filled with completely dry sand to increase the mass and stability of the stand.
Mass loading can also help reduce ringing and unwanted resonance within the stand structure, providing a more inert platform for the speaker.
The stand can be used without filling, although the final performance and stability may benefit from additional mass.
Use Completely Dry Filling Material
Use clean, dry play sand, silica sand or a suitable proprietary inert stand filler.
Do not use damp sand, building aggregate or any material that could retain moisture, corrode the stand or escape through its joints.
Position Before Filling
Each unfilled stand weighs approximately 6kg. Adding filling material and attaching a speaker will substantially increase the complete weight.
Where practical, assemble and position the stands before adding the filling material.
Once filled, avoid dragging the stands across the floor or attempting to move them by lifting the speaker cabinet alone.
Concealed Speaker-Cable Routing
The FS-700 S3 allows speaker cable to be routed through the supporting column.
The cable enters near the base and exits close to the top plate, helping create a cleaner installation with less visible cable hanging behind the stand.
Enough free cable should be left at both ends to connect the amplifier and speaker without placing strain on the terminals.
Route the Cable Before Filling
Feed the speaker cable through the stand before adding sand or fitting the speaker.
Check that the cable moves freely, is not trapped by the top plate and has sufficient length for final positioning.
Spikes for Carpeted Floors
Adjustable spikes are supplied for use on suitable carpeted floors.
The spikes can pass through the carpet and make firm contact with the solid floor beneath, helping the stand remain stable and level.
Take care to avoid damaging flooring or concealed underfloor services. Suitable protective cups may be required where spikes are used on a vulnerable hard surface.
Alternative Feet for Hard Floors
Alternative rounded feet are supplied for suitable wooden, tiled, laminate and other hard floor surfaces.
They provide a broader contact point than spikes and help reduce the risk of puncturing or scratching the floor.
The appropriate floor interface should be selected and installed before the stands are placed in their final position.
Never Leave the Base Unprotected
Fit either the supplied spikes or the alternative hard-floor feet before use.
Do not place the bare metal base directly onto the floor, as this may reduce stability and damage the surface.
Levelling the Stands
Each stand should sit firmly without rocking, leaning or transferring uneven pressure through its feet.
Adjust the spikes or alternative feet until the stand is completely stable and the top plate is level.
Once the final position has been established, check the floor feet, assembly bolts and speaker fixings again.
Speaker Placement
A useful starting point is to:
- Position both stands the same distance from the listening seat
- Leave suitable space between the speakers and the rear wall
- Avoid placing either speaker tightly into a corner
- Keep both stands completely level and stable
- Use matching toe-in for the left and right speakers
- Route the cables so they cannot pull on the stands
- Keep the stands away from busy walkways where possible
- Make small positioning adjustments rather than changing several things at once
Moving the speakers closer to a wall will normally increase bass output. Pulling them further into the room will usually improve bass definition, openness and stereo-image depth.
Assembly
The FS-700 S3 requires assembly before use.
Each base, column and top plate should be fitted together using the supplied screws and Allen keys, following the official Bowers & Wilkins instructions.
The speaker cable should be routed and any mass loading completed at the appropriate stages before the top plate and speaker are finally secured.
Protect the Finish During Assembly
Assemble the stands on a clean, soft surface to protect the black or silver finish from tools, grit and sharp objects.
Complete one stand at a time and check that every component is correctly oriented before tightening the screws.
Attaching the Speakers
Ask another person to support the speaker while it is aligned with the appropriate fixing points in the top plate.
Keep the speaker level and protect the cabinet from tools while inserting the fixing bolts.
Tighten each fixing gradually and evenly. The speaker should be secure without applying excessive force.
Moving the Complete Assembly
A filled stand with a 700 Series speaker attached can be heavy and awkward to move safely.
Disconnect the speaker cable and ask another person for assistance before repositioning the complete assembly.
Where practical, remove the speaker from the stand before moving it any significant distance.
Never lift the complete assembly using the speaker cabinet, tweeter housing or stand column alone.
Household Safety
Position the stands where they are unlikely to be struck, pulled or used for support.
Take particular care in homes with young children, pets or narrow walkways.
Speaker cables should be routed so they do not create a trip hazard or pull the stands off balance.
The direct fixing system improves security between the speaker and stand, but it cannot prevent the complete assembly from tipping if it is climbed upon or struck with sufficient force.
Finish Options
The FS-700 S3 is available in:
Finish availability should be confirmed when ordering.
Key Features
- Dedicated stands for Bowers & Wilkins 700 Series S3 standmount speakers
- Compatible with 705 S3, 706 S3 and 707 S3
- Supplied as a pair
- Model-specific direct speaker fixing
- Rigid central-column construction
- Mass loadable with completely dry sand
- Internal speaker-cable routing
- Adjustable carpet spikes supplied
- Alternative hard-floor feet supplied
- 625mm stand height without spikes
- Approximately 660mm high with spikes
- 290mm base width
- 315mm base depth
- 6kg weight per unfilled stand
- Black or silver finish
- Assembly required
Frequently Asked Questions
Are the FS-700 S3 stands supplied as a pair?
Yes. The package contains two speaker stands for a conventional stereo pair.
Which speakers fit the FS-700 S3?
The stands are designed for the Bowers & Wilkins 705 S3, 706 S3 and 707 S3 standmount speakers.
Do the speakers bolt to the stands?
Yes. The compatible speakers can be secured directly to the top plates using the appropriate supplied hardware.
Do all three speaker models use the same fixings?
No. The assembly instructions identify different fixing arrangements for the 705 S3 and 706 S3 and for the smaller 707 S3.
Are the speakers included?
No. The package contains the stands and their assembly hardware. The speakers are sold separately.
How high are the stands?
Each stand measures 625mm high without spikes and approximately 660mm high with the supplied spikes installed.
How large is the base?
The base of each stand measures 290mm wide and 315mm deep.
How much does each stand weigh?
Each unfilled stand weighs approximately 6kg.
Can the stands be filled?
Yes. The central columns can be mass loaded using completely dry play sand, silica sand or a suitable proprietary inert filler.
Is stand filler included?
No. Suitable dry filling material must be obtained separately.
Do I have to fill the stands?
No. They can be used unfilled, although mass loading may improve stability and reduce resonance.
Can speaker cable be hidden inside the stands?
Yes. The supporting columns include a route for speaker cable between the base and top plate.
Should the cable be fitted before the stands are filled?
Yes. Route and check the speaker cable before adding filling material or attaching the speaker.
Are spikes included?
Yes. Adjustable spikes are supplied for suitable carpeted floors.
Are feet for hard floors included?
Yes. Alternative rounded feet are supplied for suitable wooden, tiled, laminate and other hard surfaces.
Do the stands require assembly?
Yes. The bases, supporting columns and top plates must be assembled using the supplied hardware and Allen keys.
Can the FS-700 S3 be used with older 700 Series speakers?
Compatibility with earlier models should not be assumed. Their cabinet dimensions and threaded fixing points may differ.
Can they be used with another brand of speaker?
The top plate may physically support some other speakers, but its direct fixing system is designed specifically for the compatible Bowers & Wilkins models.
What finishes are available?
The FS-700 S3 is available in black and silver.
What warranty is included?
The stands are covered in accordance with current Bowers & Wilkins accessory warranty terms and your UK statutory rights. Contact Audio T for confirmation of the applicable manufacturer’s warranty period.
Related Bowers & Wilkins Products and Audio T Guides
Why Buy From Audio T?
- Advice on matching stands to your Bowers & Wilkins speakers
- Speaker positioning and setup guidance
- Help choosing spikes or hard-floor feet
- Stand filling and mass-loading advice
- Internal cable-routing guidance
- Speaker cable and termination advice
- Demonstrations of compatible 700 Series speakers
- Ongoing setup and after-sales support
Contact your local Audio T store for advice on matching the Bowers & Wilkins FS-700 S3 stands with the 705 S3, 706 S3 or 707 S3.