Audio T Verdict
The original Sonus faber Sonetto Stands were designed as the natural partner for the first-generation Sonetto I and Sonetto II standmount speakers. Rather than simply providing somewhere to put the cabinet, the speakers bolt securely to the stands, creating a much more integrated and stable support than a generic top plate.
The construction is reassuringly purposeful too. The stands are milled and extruded from solid aluminium, with spikes for secure floor contact, protective under-spike shoes for hard flooring and a useful cable-management channel built into the rear of the upright. A soft interface between the speaker and stand also helps the cabinet seat neatly before it is bolted into position.
If you already own an original pair of Sonetto I or Sonetto II speakers, these are increasingly difficult to find now that the range has been replaced by Sonetto G2. Audio T still has remaining stock, making this a useful opportunity to complete an original Sonetto system with the support designed specifically for it.
Important Compatibility Note
These are the original Sonus faber Sonetto Speaker Stands for the first-generation Sonetto I and Sonetto II loudspeakers. They are not the current Sonetto G2 stands. If you own Sonetto I G2 or Sonetto II G2, you require the newer G2 stand design instead.
Sonus faber Sonetto Speaker Stands
The Sonus faber Sonetto Speaker Stands were developed specifically for the original Sonetto I and Sonetto II bookshelf loudspeakers, providing a rigid, correctly proportioned support that complements both their cabinet design and intended listening height.
Each stand is built from substantial aluminium components and allows the speaker to bolt securely into position. Spikes and floor protectors are supplied, while the rear of the upright incorporates cable management to help keep the installation clean and uncluttered.
Supplied as a pair in Black, these original Sonetto Stands are now a legacy product but remain particularly valuable for owners of first-generation Sonetto I and Sonetto II speakers who want the correct factory-designed support.
- Original first-generation Sonetto Speaker Stands
- Designed for Sonus faber Sonetto I
- Designed for Sonus faber Sonetto II
- Not the current Sonetto G2 stand
- Supplied as a pair
- Black finish
- Milled and extruded aluminium construction
- Speakers bolt securely to the stands
- Soft interface between speaker and stand
- Integrated cable management
- Supplied with spikes
- Supplied with under-spike floor protectors
- 731mm high
- 305mm wide
- 340mm deep
- 4.7kg per stand
- Designed for dedicated stereo use
- Suitable for original Sonetto home cinema installations
- Remaining Audio T stock available while supplies last
Designed Specifically for the Original Sonetto Range
The Sonetto Stand was not created as a universal speaker support.
Its dimensions, height and fixing arrangement were developed around the original Sonetto I and Sonetto II bookshelf loudspeakers.
This gives it a significant advantage over a generic stand where compatibility would otherwise depend on:
- Top-plate dimensions
- Speaker stability
- Stand height
- Cabinet overhang
- Floor footprint
- Mechanical interface
Sonetto I Compatibility
The stand was designed as the dedicated support for the original Sonus faber Sonetto I.
The Sonetto I cabinet bolts directly to the stand rather than simply resting loose on a flat upper plate.
This creates a much more integrated speaker and stand assembly and helps reduce the possibility of the loudspeaker being accidentally knocked out of position.
Sonetto II Compatibility
The same stand was also designed for the larger original Sonetto II bookshelf speaker.
Owners of either original model can therefore use the dedicated Sonetto Stand rather than needing separate stand designs for Sonetto I and Sonetto II.
Original Sonetto or Sonetto G2?
If your speakers are labelled simply Sonetto I or Sonetto II and pre-date the current G2 range, these are the stands designed for them. If your speakers are Sonetto I G2 or Sonetto II G2, do not order these stands without speaking to Audio T first. The current G2 stand is a different product with different dimensions and construction.
Secure Bolt-On Speaker Mounting
One of the most useful features of the original Sonetto Stand is the way the loudspeaker attaches directly to it.
Instead of relying purely on the speaker's weight or adhesive pads to keep the cabinet in position, the Sonetto I or Sonetto II can be mechanically secured to the stand.
Why Bolt the Speaker to the Stand?
A secure mechanical connection helps create a more stable complete assembly.
It can also provide additional peace of mind in rooms where the loudspeakers may be exposed to:
- Children
- Pets
- Busy walkways
- Accidental knocks
- Regular cleaning around the system
Soft Interface Between Speaker and Stand
Audio T's own original Sonetto I demonstration highlighted the soft interface between the bottom of the loudspeaker and the top of the stand.
This gives the cabinet a defined seating surface before the speaker is securely bolted down.
Aluminium Construction
The original Sonetto Stands are manufactured from milled and extruded solid aluminium components.
Aluminium is well suited to loudspeaker-stand construction because it offers useful rigidity without requiring excessively bulky structural sections.
Why Rigidity Matters
A speaker stand should provide a stable mechanical platform rather than flexing or moving unnecessarily as the loudspeaker operates.
The objective is to allow the drive units to move air while keeping the loudspeaker cabinet and its supporting structure as controlled as practical.
4.7kg per Stand
Each Sonetto Stand weighs 4.7kg.
The pair therefore adds approximately 9.4kg of dedicated support beneath the loudspeakers before the weight of the Sonetto cabinets themselves is taken into account.
731mm Stand Height
The original Sonetto Stand measures 731mm high.
This is noticeably taller than the current Sonetto G2 stand and is one of the reasons the two generations should not be confused.
Why Stand Height Matters
The vertical relationship between the drive units and listening position can affect:
- Treble balance
- Stereo image focus
- Soundstage height
- Driver integration
A dedicated stand provides a repeatable starting point rather than relying on the height of whatever furniture happens to be available.
305mm Width
The stand measures 305mm wide at its overall footprint.
This gives the speaker a broader supporting base than the loudspeaker cabinet alone.
340mm Depth
Overall stand depth is 340mm.
When planning a room, allow additional space for the loudspeaker cabinet, speaker cable, toe-in and the required distance from the wall.
Integrated Cable Management
A cut-out in the rear of the stand upright provides a route for the speaker cable.
This helps keep the installation neat, particularly where the speakers are positioned well into the room and exposed cable would otherwise hang prominently behind the stand.
Why Cable Management Helps
Integrated cable routing does not change the electrical performance of the loudspeaker, but it can make the finished installation considerably tidier.
It also helps prevent excessive loose cable hanging around the base of the stand.
Leave Enough Cable for Positioning
Do not cut or route speaker cable so tightly that the loudspeaker cannot be adjusted.
Leave sufficient length for:
- Toe-in adjustment
- Moving the speaker forwards or backwards
- Accessing the rear terminals
- Lifting the speaker from the stand if required
Supplied Spikes
The Sonetto Stand package includes eight spikes, providing four floor-contact points per stand.
Spikes can help create a stable interface where the floor and installation are suitable.
Under-Spike Floor Protectors
Eight under-spike protectors are also supplied.
These are particularly useful on:
- Wooden flooring
- Laminate
- Tile
- Stone
- Other hard surfaces that could be marked by bare spikes
Use the Correct Floor Interface
The aim is for both stands to remain secure and stable without rocking.
Take particular care when installing them on delicate hard floors.
Supplied Mounting Hardware
The original stand package was supplied with the fixing hardware required for installation.
The documented contents include:
- Pair of Sonetto Stands
- 8 spikes
- 8 under-spike protectors
- 10 washers
- 10 countersunk hexagonal screws
- 14 hex-head screws
- Allen wrench
- Manual
Remaining Stock
As these are now a discontinued original-generation accessory, the exact contents of remaining Audio T stock should be checked at the point of purchase, particularly if the stands have previously been opened or displayed. The fixing hardware is important because the Sonetto speakers are designed to bolt to the stands.
Why Use a Speaker Stand?
Bookshelf loudspeakers are often better described as standmount speakers when they are being used in a dedicated hi-fi system.
A proper speaker stand gives you much greater control over:
- Speaker height
- Distance between the speakers
- Distance from walls
- Toe-in
- Mechanical stability
- Left/right symmetry
Why Not Simply Put the Speakers on Furniture?
Furniture can work, but it fixes many important variables before you have even started listening.
A sideboard or cabinet dictates its own:
- Height
- Width
- Wall position
- Speaker spacing
- Surface resonance
Dedicated stands allow the loudspeakers to be positioned according to the room rather than according to the furniture.
Better Freedom to Adjust Wall Distance
The original Sonetto I and Sonetto II use front-facing reflex arrangements, but that does not mean their distance from the rear wall is irrelevant.
Moving the loudspeakers further into or closer to the room boundaries can significantly affect bass balance.
Toe-In Adjustment
A freestanding support also allows the complete loudspeaker to be rotated towards or away from the listening position.
Toe-in can influence:
- Centre-image focus
- Soundstage width
- Treble balance
- Image depth
Start With Small Changes
There is rarely a need for dramatic positioning adjustments.
A few centimetres of movement or a small change in angle can produce an audible difference.
Useful for Stereo Systems
The Sonetto Stand is most naturally used in a dedicated two-channel system with the original Sonetto I or Sonetto II.
It gives the speakers a stable floorstanding support while retaining the positioning flexibility of a standmount loudspeaker.
Useful for Home Cinema
The original Sonetto range was also designed to work as a complete multichannel loudspeaker family.
Sonetto I or II speakers on their matching stands can therefore be used as:
- Front left and right channels
- Side surround speakers
- Rear surround speakers
Can I Use These Stands With Other Speakers?
They are not intended as universal speaker stands.
The bolt-on interface and proportions were developed specifically around the original Sonetto I and Sonetto II.
For another speaker model, choose a stand designed around that loudspeaker's:
- Cabinet dimensions
- Weight
- Required listening height
- Mounting arrangement
Can They Be Used With Sonetto G2?
These stands should not be treated as the correct support for the current G2 models.
Sonus faber introduced a different dedicated stand for Sonetto I G2 and Sonetto II G2, with different dimensions, mass and construction.
Original Sonetto Stand
- Original Sonetto I and II
- Aluminium construction
- Bolt-on speaker mounting
- Integrated cable management
- 731mm high
- 305mm wide
- 340mm deep
- 4.7kg each
Current Sonetto G2 Stand
- Current Sonetto I G2 and II G2
- Aluminium construction
- Concrete base
- Different G2 design
- 687mm high
- 355mm wide
- 406mm deep
- 6.5kg each
Original and G2 Stands Are Not the Same Product
The fact both products are called Sonetto Stands can understandably cause confusion.
The original model is taller, narrower, shallower and lighter than the current G2 stand and uses the distinctive bolt-on aluminium construction associated with the first-generation range.
A Useful Upgrade for Existing Sonetto Owners
For somebody who already owns first-generation Sonetto I or Sonetto II speakers but has been using generic stands, this remaining stock provides an opportunity to install the factory-designed supports long after the original speaker range has left production.
Increasingly Difficult to Replace
Unlike a current accessory that can normally be reordered from the manufacturer, discontinued dedicated stands become progressively more difficult to source once remaining dealer stock has gone.
That makes the original Sonetto Stand particularly relevant to existing Sonetto owners rather than customers buying into the current G2 range.
Black Finish
The original stands are supplied in Black.
The neutral finish was designed to complement the different cabinet finishes available across the original Sonetto bookshelf range.
Dimensions
- Height: 731mm
- Width: 305mm
- Depth: 340mm
- Weight: 4.7kg per stand
Measure the Floor Space
When planning the installation, use the stand's 305 x 340mm floor dimensions as your minimum footprint.
Also allow room for:
- Toe-in
- Speaker-cable routing
- Wall clearance
- Safe walking space
- Access to the rear speaker terminals
Recommended Setup Routine
- Confirm that your loudspeakers are original Sonetto I or Sonetto II models.
- Check that all stand fixing hardware is present before beginning assembly.
- Choose the approximate left and right speaker positions.
- Assemble each stand according to the supplied instructions.
- Fit the appropriate spikes or floor-protection arrangement.
- Make sure each stand is stable and cannot rock.
- Place the loudspeaker onto the soft upper interface.
- Align the fixing points carefully.
- Bolt the loudspeaker securely to the stand using the correct hardware.
- Route the speaker cable through the stand's cable-management section where desired.
- Leave sufficient cable length for final positioning.
- Switch the amplifier off before making speaker connections.
- Check positive and negative polarity on both channels.
- Begin with the speakers in broadly symmetrical positions.
- Start with modest inward toe-in.
- Use a centrally recorded vocal to check image focus.
- Fine-tune speaker spacing.
- Adjust wall distance according to bass balance.
- Fine-tune toe-in in small increments.
- Check that the stands remain stable after final positioning.
Using the Stands on Wooden Floors
The supplied under-spike protectors are intended to prevent bare spikes contacting delicate hard flooring directly.
Take care when moving or positioning the complete speaker and stand assembly.
Using the Stands on Tile or Stone
The floor protectors are equally useful where spikes might scratch, chip or mark a hard finished surface.
Using the Stands on Carpet
Use the supplied floor interface in accordance with the original assembly instructions and make sure all four support points are stable.
Do Not Drag the Complete Assembly
Once a Sonetto loudspeaker has been bolted onto the stand, lift or carefully reposition the system rather than dragging it across delicate flooring.
Check the Fixings Periodically
If the speakers are moved regularly, it is sensible to check that the mechanical connections remain secure.
Do not overtighten fasteners beyond the intended installation requirements.
Caring for the Stands
The Black aluminium surfaces can be kept clean with a soft dry or slightly damp cloth.
Avoid:
- Abrasive cleaning pads
- Harsh household detergents
- Solvents
- Metal polish
- Spraying liquid directly onto the stand
Who Are the Original Sonetto Stands For?
- Owners of original Sonus faber Sonetto I speakers
- Owners of original Sonus faber Sonetto II speakers
- Customers still using generic stands with first-generation Sonetto speakers
- Customers wanting the correct factory-designed support
- Existing Sonetto systems requiring replacement or matching stands
- Stereo systems
- Original Sonetto home cinema installations
- Customers wanting secure bolt-on mounting
- Customers wanting integrated cable management
- Customers wanting a cleaner installation on hard floors
Who Are They Not For?
- Sonetto I G2 owners
- Sonetto II G2 owners
- Sonetto floorstanding speakers
- Sonetto Wall models
- Universal loudspeaker installations where a generic top plate is required
Key Features
- Original Sonus faber Sonetto Stand
- First-generation Sonetto accessory
- Dedicated Sonetto I stand
- Dedicated Sonetto II stand
- Not Sonetto G2
- Supplied as a pair
- Black finish
- Solid aluminium construction
- Milled aluminium components
- Extruded aluminium components
- Bolt-on speaker mounting
- Soft speaker-to-stand interface
- Integrated rear cable management
- 8 spikes supplied
- 8 under-spike protectors supplied
- Mounting hardware supplied
- Allen wrench supplied
- 731mm height
- 305mm width
- 340mm depth
- 4.7kg per stand
- Approximately 9.4kg per pair
- Suitable for hard floors with protectors
- Suitable for carpet
- Designed for stereo systems
- Suitable for original Sonetto AV systems
- Discontinued manufacturer model
- Remaining Audio T stock
Frequently Asked Questions
Are these Sonus faber Sonetto Stands still current?
No. These are the original first-generation Sonetto Stands and have been superseded by the current Sonetto G2 stand.
Why are Audio T still selling them?
Audio T has remaining saleable stock of the original stands.
Are these the Sonetto G2 stands?
No.
What speakers are these stands designed for?
The original Sonus faber Sonetto I and Sonetto II standmount loudspeakers.
Do they fit the original Sonetto I?
Yes.
Do they fit the original Sonetto II?
Yes.
Do they fit Sonetto I G2?
They should not be treated as the correct G2 stand. Sonetto I G2 uses the newer dedicated Sonetto G2 stand.
Do they fit Sonetto II G2?
The current Sonetto II G2 uses the newer G2 stand design rather than this original stand.
How can I tell which Sonetto speakers I own?
Check the model identification and purchase date. If you are unsure whether your speakers are original Sonetto or Sonetto G2, contact Audio T before ordering.
Are the stands sold as a pair?
Yes.
Are the speakers included?
No. This listing is for the stands only.
What colour are the stands?
Black.
What are the stands made from?
They are constructed from milled and extruded aluminium components.
Are they solid aluminium?
The documented construction describes them as milled and extruded from solid aluminium billets.
How tall are they?
731mm.
How wide are they?
305mm.
How deep are they?
340mm.
How much does each stand weigh?
4.7kg.
How much does the pair weigh?
Approximately 9.4kg before the loudspeakers are installed.
Do the speakers simply sit on top?
No. The original Sonetto I and Sonetto II are designed to bolt securely to these stands.
Why is bolt-on mounting useful?
It creates a more secure speaker and stand assembly than simply resting the cabinet loose on a flat top plate.
Is there padding between the speaker and stand?
Yes. Audio T's original Sonetto demonstration describes a soft interface between the loudspeaker base and stand before the cabinet is bolted down.
Do they have cable management?
Yes. A cut-out in the rear of the upright is provided for speaker-cable management.
Is the speaker cable completely hidden?
The stand provides cable-management routing, although the exact amount of visible cable will depend on the installation.
Are spikes included?
The original package specification lists eight spikes.
Are floor protectors included?
Yes. Eight under-spike protectors are listed with the original package.
Can I use the stands on wooden flooring?
Yes. Use the supplied under-spike protectors to avoid bare spikes contacting delicate timber directly.
Can I use them on laminate?
Yes, with suitable floor protection.
Can I use them on tile?
Yes.
Can I use them on stone?
Yes.
Can I use them on carpet?
Yes, provided the stands are installed securely and remain stable.
Are the mounting screws included?
The original package included washers, countersunk hexagonal screws, hex-head screws and an Allen wrench.
Does remaining Audio T stock definitely include every original fixing?
Please check at the point of purchase, particularly for any opened or ex-display stock, because the stands rely on their dedicated fixing hardware.
Do speaker stands make a difference?
They can make a significant practical difference by allowing the speakers to sit at the intended height and giving you greater freedom to optimise spacing, wall distance and toe-in.
Will they improve bass?
The biggest bass benefit usually comes from being able to position the speakers properly relative to walls and corners.
Will they improve stereo imaging?
Correct stand height, speaker spacing and toe-in can all contribute to better stereo image focus.
Can I use a generic stand instead?
Yes, but you lose the original Sonus faber bolt-on interface and must independently check height, stability and top-plate suitability.
Can I use these stands with another brand of speaker?
They are not intended as universal stands and are specifically designed around the original Sonetto I and Sonetto II.
Can I use these stands for home cinema?
Yes, where original Sonetto I or II speakers are being used as freestanding front or surround channels.
Are these stands different from the current G2 stands?
Yes. The original stand is 731 x 305 x 340mm and weighs 4.7kg each, while the current G2 stand has different dimensions, construction and weight.
Is the original stand taller than the G2 version?
Yes. The original stand is 731mm high, while the current G2 stand is 687mm high.
Does the original stand have a concrete base?
No concrete base is specified for this original stand. The concrete base belongs to the newer Sonetto G2 stand design.
Why should I buy the original stand if I already own original Sonetto speakers?
It provides the correct factory-designed height, secure bolt-on mounting, integrated cable management and matching styling for the first-generation Sonetto I and II.
Will these become harder to find?
They are a discontinued dedicated accessory, so availability is limited to remaining dealer or second-hand stock.
Should I check compatibility before ordering?
Yes, particularly if you are unsure whether your loudspeakers are original Sonetto or Sonetto G2.
Related Sonus faber Products and Audio T Guides
Why Buy Sonus faber Sonetto Speaker Stands From Audio T?
These stands are now a discontinued accessory, so identifying the correct generation matters. Audio T can help confirm whether your speakers are original Sonetto I or Sonetto II models and whether these are the correct supports before you order.
We can also advise on speaker placement, cable routing, toe-in and amplifier matching to help you get the best from an existing Sonetto system. As these are remaining original-generation stands, availability is limited to current Audio T stock.
- Original Sonetto compatibility advice
- Sonetto generation identification
- Speaker stand setup advice
- Speaker positioning guidance
- Toe-in optimisation
- Rear-wall placement advice
- Speaker cable guidance
- Hard-floor installation advice
- Original Sonetto system support
- Home cinema setup advice
- Ongoing after-sales support
Contact your local Audio T store if you would like us to confirm compatibility with your original Sonetto speakers before ordering.