Audio T Verdict
The Grandview Cyber Series is a practical choice when you want a proper projection screen without dedicating an entire wall to it. The motorised surface can be lowered for films, television, games and sporting events, then retracted when it is no longer required. Built-in infrared control and a projector trigger input make it easy to operate, while Grandview’s current WM5 matte-white fabric provides a neutral, wide-angle surface for conventional home cinema projection.
A motorised projector screen is particularly useful in a living room or multipurpose space. It can be positioned in front of a television, window or otherwise usable section of wall, allowing a large projected image to become part of the room only when required.
The Cyber Series can be mounted to a wall, fitted to a ceiling or suspended using suitable hardware. Its floating mounting brackets allow some horizontal adjustment during installation, helping the screen casing line up correctly with the projector and room.
Motorised Operation
The screen lowers and retracts electrically, removing the need to pull the surface down manually. It can be stopped at the required position, allowing the visible image area to be aligned with the projector and seating layout.
WM5 Matte-White Fabric
Grandview’s current WM5 surface uses a four-layer construction with fibreglass as its main supporting layer. The material is designed to resist stretching, deformation, moisture and changes in temperature while maintaining a consistent projection surface.
Wide Viewing Angle
The WM5 surface has a manufacturer-specified gain of 1.0 and a 160-degree viewing angle. This helps distribute reflected light evenly across a broad seating area rather than concentrating the brightest image around a narrow central position.
IR Remote Control
Built-in infrared control allows the screen to be raised, lowered and stopped using the remote control. Wall and in-line switching are also supported, giving the screen a straightforward manual control option.
Projector Trigger Control
A 3-12V trigger input allows the screen to operate with compatible projectors and control equipment. When correctly connected and configured, the screen can lower when the projector is switched on and retract when it is switched off.
System Integration
Grandview also lists RS485, dry-contact and central-control support for the current Cyber range. Optional RF, external IR and IP control equipment is available for more involved installations, although the exact interface fitted to the supplied UK model should be confirmed before installation.
Current Audio T Size Options
- 7ft wide: approximately 92 inches diagonal
- 8ft wide: approximately 106 inches diagonal
- 9ft wide: approximately 120 inches diagonal
- 10ft wide: approximately 138 inches diagonal
These measurements refer to the nominal screen size. The complete casing is wider than the viewable image, so the full product dimensions should always be checked before installation.
Choose the Screen Before Mounting the Projector
The screen size determines the projected image width and therefore affects throw distance, lens position and mounting height. Check the projector manufacturer’s throw-distance information for the exact projector and screen combination before drilling holes or installing permanent cables.
You should also allow sufficient space for the screen casing, power connection, surrounding furniture and the fully lowered surface. Audio T can help you assess these requirements before ordering.
Designed for Flexible Rooms
When retracted, the Cyber Series leaves the wall or television behind it accessible. This makes it a useful alternative to a fixed-frame screen in rooms that serve more than one purpose. It also protects the projection surface from everyday contact when the cinema system is not being used.
The black border helps define the edge of the image and disguise small alignment errors. The upper drop allows the visible picture to be positioned at a comfortable height, although its adjustment limits vary according to screen size.
Installation and Screen Care
The supporting wall or ceiling must be capable of carrying the screen safely. Grandview recommends secure, level mounting and advises using fixings appropriate for the construction of the room. Electrical installation and integration should be completed by a suitably qualified person.
Avoid touching, folding or writing on the screen surface. Grandview recommends retracting the screen after use and cleaning it only with a soft cloth and lukewarm water. Detergents and household cleaning products should not be used.
Frequently Asked Questions
Is this still a current Grandview screen?
Yes. Grandview continues to list the Cyber Series as a current motorised projector screen. The company’s current published range begins at 92 inches, so availability of any smaller legacy size should be confirmed before ordering.
Can the screen operate automatically with my projector?
Yes, provided the projector or control system has a compatible trigger output. The current Cyber specification supports a 3-12V trigger connection.
Does it include remote control?
Grandview lists built-in infrared remote control as a standard control option. Confirm the exact accessory pack supplied with your chosen UK model when ordering.
Can it be mounted on either a wall or ceiling?
Yes. Grandview supports floating wall mounting, ceiling mounting and suspended mounting. Suitable fixings must be chosen for the building structure.
Is this a tab-tensioned screen?
No. This is the standard motorised Cyber screen. Grandview also produces a separate tab-tensioned version for installations where additional side tensioning is required.
What is the screen gain?
Grandview’s current WM5 matte-white fabric has a specified gain of 1.0 and a 160-degree viewing angle.
Can I leave the screen lowered permanently?
Grandview recommends retracting the screen after use. Leaving it lowered for extended periods may eventually allow the fabric to loosen.
Can it be hidden inside the ceiling?
The Cyber casing can be ceiling mounted or positioned behind a suitable pelmet, but it is not Grandview’s dedicated recessed ceiling model. Check ventilation, access, control reception and installation clearances before concealing the casing.
Can I use it with an ultra-short-throw projector?
Compatibility should not be assumed. Ultra-short-throw projectors normally require a surface designed for their steep projection angle. Contact Audio T with the projector model before ordering.
Related Audio T Categories
Why Buy From Audio T?
Choosing a screen involves more than measuring the available wall. Audio T can help you consider projector throw distance, image brightness, seating position, screen height, mounting requirements and control compatibility. We can also help you decide whether a standard motorised, tab-tensioned or fixed-frame screen is the best choice for your room.
Please speak to your local store before ordering so the exact size, control interface and installation requirements can be checked against your projector and room.
Find Your Nearest Audio T Store