Audio T Verdict
The Naim FraimLite Standard-Height Level is the most compact expansion module for a FraimLite equipment rack. Each level creates 131mm of nominal equipment space beneath its new platform and adds 150mm to the assembled rack while supporting the next component directly on its veneered shelf.
Audio T offers this page in single-level and two-level twin-pack versions. Both are available in six matching platform and upright combinations, producing twelve selectable variants. The FraimLite Base is not included with either pack size.
FraimLite uses a three-point cup-and-cone structure without the glass sub-shelf found on full Fraim. Standard spacing keeps a system compact, but the component below each added level must fit within 131mm while retaining the required ventilation and connection clearance.
Naim FraimLite Standard-Height Level and Twin Pack
FraimLite is Naim's simplified modular equipment-support system. Each standard level connects to the structure beneath through three minimal-contact cup-and-cone interfaces, while the equipment rests directly on a shaped veneered composite platform.
Choose one level when adding a single component position or select the twin pack when two matching standard-height levels are required. Both use the same 131mm available height and 150mm overall height per level.
Designed For
- Extending an existing Naim FraimLite rack
- Providing 131mm of nominal equipment clearance per level
- Lower-profile components with suitable ventilation needs
- Adding either one or two matching support positions
- Keeping a multi-level equipment rack compact
- Selected mixed FraimLite and full Fraim installations
Important Limitations
- Neither pack can stand independently on the floor
- A compatible base or existing rack stack is required
- The single pack contains one level
- The twin pack contains two matching levels
- No glass shelves are included or required
- Maximum load is 50kg per shelf, evenly distributed
- Maximum load for one complete assembly is 90kg
Single Level or Two-Level Twin Pack
Single-Level Option
The single-level version contains one veneered standard platform, three standard-height uprights and the required level assembly hardware. It creates one additional equipment-support surface and adds 150mm to the rack.
Two-Level Twin Pack
The twin pack contains two matching standard-height levels in the selected platform and upright finish. Installed together, they create two support surfaces and add 300mm to the rack. They still count as two levels towards Naim's six-level maximum above one base.
The FraimLite Base Is Sold Separately
Neither the single level nor the twin pack includes a floor-standing base. A new independent stack requires one FraimLite Base, while an existing compatible rack can accept the selected level pack within Naim's height and load limits.
The Uprights Set the Space Below
The three standard uprights connect each new platform to the support structure beneath. They create 131mm of nominal space for the component immediately below that platform. The newly installed veneered surface then supports another component above.
With a twin pack, the first added level determines clearance above the component beneath it, and the second added level determines clearance above the component placed on the first new shelf. A component on the uppermost shelf has no overhead restriction unless another level is later added.
131mm Available Height
Naim publishes 131mm as the available height for each standard FraimLite level. The corresponding overall level height is 150mm. The available figure describes nominal equipment clearance, while the overall figure shows how much one module adds to the rack.
Measure the complete component, including feet and any upper projections, and retain space for cooling. Rear plugs, aerials, controls and cable bends may require more clearance than the front-panel dimensions indicate. Follow the equipment manufacturer's ventilation instructions.
When 131mm is insufficient, the medium FraimLite level provides 206mm and the tall version provides 280mm. Choosing the shortest safe option keeps the rack lower without compromising installation requirements.
Direct Veneered Equipment Support
Equipment rests directly on a shaped 19mm double-veneered composite shelf. The usable support area is 452 x 340mm within the rack's overall 643 x 442mm footprint.
Check the position of every equipment foot rather than relying only on the outside chassis dimensions. All feet must sit securely on the platform, with room for the case, ventilation openings and rear connections.
No Glass Shelf Is Supplied
FraimLite intentionally supports equipment directly on its veneered panel. It does not include the full Fraim glass sub-shelf, support balls, sockets or locating pin. Do not add ordinary glass in an attempt to reproduce the reference Fraim structure.
Three-Point Cup-and-Cone Structure
Three extruded anodised aluminium uprights connect each standard level to the module below. Custom cups, cones, clamping rings, studs and nuts create rigid minimal-contact interfaces between successive levels.
The three-point arrangement avoids the rocking associated with four imperfectly matched contact points. Correct assembly remains essential, and the completed rack must be positioned on a level surface capable of carrying its total loaded weight.
Six Finish Combinations in Two Pack Sizes
Audio T currently offers the following combinations as either a single level or a matching two-level twin pack:
- Black platform with natural aluminium uprights
- Black platform with black anodised uprights
- Cherry platform with natural aluminium uprights
- Cherry platform with black anodised uprights
- Natural Ash platform with natural aluminium uprights
- Natural Ash platform with black anodised uprights
This produces twelve selectable variants across the two quantities. Cherry Tint appears within parts of the wider full Fraim range but is not listed for this FraimLite standard-level product.
Real wood veneer varies naturally in grain and tone. Match both the platform and upright finish when extending an existing rack, and ask Audio T for help if the original specification is uncertain.
Weight and Load Limits
One standard FraimLite level weighs 3.5kg. Two levels therefore have a combined net weight of 7kg before packaging; Audio T publishes shipping weights of 5.4kg for the single level and 8.9kg for the twin pack.
Naim states a maximum safe load of 50kg on each shelf, evenly distributed, and a maximum load of 90kg for one complete Fraim or FraimLite assembly. Both restrictions apply. A twin pack adds two shelves but does not increase the 90kg total-rack limit.
Include the base, every level and all equipment when confirming that the floor and its supporting structure are suitable. Place heavy components low in the stack where practical and within the ventilation requirements of each product.
Maximum Rack Configuration
Naim permits up to six standard or medium levels above a single base. A twin pack uses two of those six positions. Tall-upright configurations are limited to two levels, and any arrangement mixing upright heights should be checked before ordering.
The maximum number of modules and the maximum weight are separate restrictions. A six-level rack must still remain within the 50kg individual shelf limit and the 90kg maximum for the complete assembly.
Ventilation and Component Order
Standard spacing is appropriate only where the component fits inside 131mm with its required cooling allowance. Products with top ventilation, valves, opening lids or upward-facing connectors may require a medium or tall level.
Power supplies and power amplifiers may generate heat and magnetic fields. Additional spacing or a second rack stack can be preferable when they would otherwise sit close to sensitive source or pre-amplifier components.
Cable Clearance and Dressing
Check every cable before finalising the order of components. DIN plugs, Burndy collars, mains connectors and network leads need sufficient space behind the equipment and should not be stretched, sharply bent or pressed against the uprights.
Standard spacing keeps the system compact but can make rear access tighter. Leave access to mains switches and ensure that cables can reach naturally without blocking ventilation openings or pulling against the supported equipment.
Mixing FraimLite and Full Fraim Levels
Naim permits FraimLite and reference Fraim levels to be combined as part of a gradual upgrade path. A FraimLite level always retains direct veneered support, while a full Fraim level brings its own ball-supported toughened-glass sub-shelf.
Mixing the two does not make their support structures identical. Ask Audio T to verify the required hardware, finish alignment, overall configuration and correct assembly sequence before modifying an existing rack.
Assembly and Care
Unload the rack before adding, removing or rearranging levels. Follow Naim's assembly sequence so that each cup, cone, upright, stud, clamping ring and nut is fitted in the correct orientation. Protect the veneer and anodised surfaces during the work.
Dust the shelf and uprights with a clean, soft cloth. Avoid abrasive cleaners, excessive moisture and products that leave a slippery residue beneath equipment feet. Recheck rack level and stability after relocation or significant system changes.
Key Features
- Available as one level or a matching two-level twin pack
- 131mm nominal equipment clearance per level
- 150mm overall rack-height increase per level
- Direct 19mm veneered composite equipment support
- Three-point cup-and-cone inter-level interface
- No glass sub-shelf or ball-bearing support system
- Six finish combinations in each pack size
- 452 x 340mm equipment-support area per level
- 50kg maximum evenly distributed load per shelf
- Requires a compatible base or existing rack stack
Frequently Asked Questions
Does this page offer one level or two?
Both are available. Select a single-level option for one module or the twin-pack option for two matching standard-height modules. Check the complete option name before ordering.
Does either option include the FraimLite Base?
No. The base is a separate product. These are expansion levels for a FraimLite Base or another compatible rack stack.
What does 131mm available height mean?
It is the nominal vertical space created beneath each new standard platform. The component in that position must fit while retaining adequate ventilation and connector clearance.
Does the level include a glass shelf?
No. FraimLite equipment rests directly on the veneered platform. Glass sub-shelves and ball supports belong to full Fraim levels.
Does the twin pack count as two levels?
Yes. It provides two complete standard-height levels and uses two positions within Naim's maximum of six standard or medium levels above one base.
How does standard compare with medium FraimLite?
Standard provides 131mm clearance and adds 150mm per level. Medium provides 206mm clearance and adds 225mm, making it more suitable for taller or warmer-running components.
Which finish should I order?
Match both the platform veneer and upright colour. Black, Cherry and Natural Ash are offered with either natural aluminium or black uprights. Cherry Tint is not listed for this product.
Can I combine FraimLite and full Fraim levels?
Naim supports mixed systems as a gradual upgrade path. The shelf constructions remain different, so ask Audio T to verify the parts, appearance and assembly before reconfiguring the rack.
Can Audio T help choose between single and twin packs?
Yes. Audio T can check the number of components, required spacing, finish, loaded weight and cable arrangement, then confirm the most suitable pack and rack configuration.
Why Buy From Audio T?
This page combines single and twin-pack options, so the quantity, finish and upright colour must all be checked. Audio T can verify the exact variant and confirm that 131mm spacing is appropriate for every component affected by the new level or levels.
Your local store can also plan the complete stack, calculate loaded weight, check cable dressing and advise on careful assembly or gradual upgrading to full Fraim levels.
More Details - Register your Naim Product Today