ATC C4 Mk2 Subwoofer
Perfectly complimenting the SCM20ASL Limited Edition, both sonically and visually, the C4 Sub Mk2 Limited Edition brings professional quality sound engineering into your home. This subwoofer is designed and built without compromise and delivers new standards of clarity in the lowest four octaves, enhancing the audio experience for music and film devotees.
Features
SEALED CABINET FINISHED IN HIGH-GLOSS BLUE WITH LEATHER UPHOLSTERED BAFFLE
PROPRIETRY ATC SUB-BASS DRIVER
IDEAL PARTNER TO SCM20ASL LE
ON-BOARD 300W MOSFET CLASS A/B AMPLIFIER
ADJUSTABLE GAIN, LOW PASS FREQUENCY, POLARITY AND PHASE SETTINGS
COMPATIBLE WITH STEREO, HOME CINEMA AND AV APPLICATIONS
HAND-BUILT IN ENGLAND
6 YEAR WARRANTY
ACOUSTIC SPECIFICATIONS
Bass/mid driver: 1 x 150mm/6”, SB75-150SL 8O
High Frequency Driver: 1 x 25mm/1”, SH25-76S 6O
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
High Frequency Cut-off: 25kHz (-6dB)
Crossover Point: 2.2kHz
MaxSPL: 108dB continuous, 114dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
Sensitivity: +4dBu rev 95dBC (Bass Boost 0dB, Input Sensitivity 1V, Pink noise).
ELECTRONIC SPECIFICATIONS
Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hot
Input Impedance: 20kO (dif ferential)
Input CMRR: >60dB at (10kHz)
Input Sensitivity: 2.2dBu/1Vrms for full power
Input Sensitivity Control: -6dB switchable, -6dB variable. Total adjustment 2.2dBu/1Vrms to 14.2dBu/4Vrms
Bass Shelf: -2dB to +3dB, switchable in 1dB steps
Crossover Filters: 2nd Order Linkwitz Riley
Amplifier type: Grounded Source MOSFET, class A /B, convection cooled
Output Power: Bass 200W (8O), H.F. 50W (8O)
THD+N: <0.0017%/-95dB (1kHz, 1dB below rated power, 90kHz BW)
Frequency Response: <2Hz to >200kHz (-3dB)
Limiter: ATC Active FET Momentary Gain Reduction
Electronic amp protection: Amplifier d.c. of fset and over-temperature (both indicated by rear panel LED)
Mains Input: 220-230V or 115V, factory set. Please observe panel markings and labels!
Power Consumption: Idle 26W/41VA. 1/8 Power 116W/116VA. Full Power 312W/398VA
Heat Output: Idle 89BTU/hr, 1/8 Power 311BTU/hr, Full Power 382BTU/hr
PHYSICAL SPECIFICATIONS
Net Weight: 27kgs/59.5lbs
Dimensions: HxWxD 450x250x425mm 17 11/16” x 9 13/16” x 14 3/16”