Dynaudio Emit 25C Centre Speaker | Dynaudio | Audio T
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Dynaudio Emit 25C Centre Speaker

Dynaudio Emit 25C Centre Speaker

It could be argued that the centre channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.

Emit 25C gets it right.

It’s essentially an Emit 30, turned on its side, with the mid/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.

High-quality mid/bass drivers
Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material Dynaudio developed decades ago, and have been refining ever since for use in all their most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.

The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. They’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.

Top-end performance
Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in the Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.

Danish cabinet design
Emit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, as you should be spending more time looking at the picture above it than the speaker itself.

Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.


Sensitivity: 87dB (2.83V/1m)
IEC Power Handling: 180 watt
Impedance: 4 Ohm
Frequency response (± 3 dB): 53Hz - 25kHz (-6 dB 46 Hz - 35 Khz)
Box principle: Bass reflex rear double flared port
Crossover: 2.5-way
Crossover frequency: 1000/3500Hz
Crossover topology: 1st order tweeter / 2nd order woofer
Tweeter: Cerotar soft dome with Hexis
Midrange / Woofer: 14 cm MSP
Woofer: 14 cm MSP
Weight (Pcs): 10.98 Kg / 24.2 lb
Dimensions (W x H x D): 550 X 170,1 X 271,5 mm
Dimensions with feet/grill (W x H x D): 550 X 170,1 X 284,5 mm