Audio T - ProAc Response D30RS Speakers
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
ProAc Response D30RS Speakers

ProAc Response D30RS Speakers

The Response D30 floorstander uses a new acoustically damped fibre cone, also coated on the rear and with a ProAc phase plug. Bass loading is achieved by side vented directional loading similar to that used in the D48, producing an extremely accurate and powerful bass response with good extension and low colouration.

The D30 is available in both ribbon and dome tweeter configurations and features the same high quality HF units found in the D48/D48R. The crossover network employs dedicated components of the highest quality and multi strand oxygen free copper wiring. The classic ProAc split crossover design offers bi-wiring and bi-amping options.

The D30 therefore offers a similar bass loading, cone material, tweeter and crossover network to that of its larger sibling, making it an ideal choice for those who require a smaller floorstander, but still demand sonic excellence.

Once set up using the supplied ProAc orginal design spikes, which are designed to penetrate even thick carpet and when partnered with quality electronics, the exceptional performance of the D30 can be fully realised. Offering clean powerful bass, an uncoloured, open midrange and a sweet, detailed high frequency response from either the ribbon or dome tweeter, the Stewart Tyler designed D30 offers a wonderfully natural and musical performance with pinpoint imagery.

SPECIFICATION

Nominal - Impedance 8Ω
Recommended Amplifiers - 10 - 200W
Frequency Response - 20Hz - 30kHz
Sensitivity - 89dB linear for 1 Watt at 1 Meter
Bass/Midrange Driver - 6 ½” (165mm) ProAc unit fitted with an acoustically damped fibre cone with rear coating and phase plug
Tweeter - D30DS Fitted with 25mm silk dome tweeter with air cooling
Tweeter - D30RS ProAc ribbon 60mm x 10mm ‘as light as a human hair’, with rear chamber damping
Crossover - HQC network using the finest dedicated components wired with ProAc multistrand oxygen free copper cable throughout. Split for Bi Wiring or Bi Amplification

Height 41” (1041mm)
Width 10” (266mm)
Depth 12” (311mm)

Weight - 59lb (27kg) each
Mode - Floor standing
Grille - Acoustically transparent crimplene

Finish - Available in the following real wood veneers: Black Ash, Mahogany, Cherry, Maple and Oak with Rosewood and Ebony to order at extra cost. Also available in Silk White at no extra cost.