Ortofon 2M Black Cartridge | Ortofon | Audio T
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Content
Ortofon 2M Black Cartridge

Ortofon 2M Black Cartridge

The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus - the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high-frequency groove information.

Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear, and reduced distortion and phase error as a result of the diamond’s improved tracking geometry The cartridge body used for the 2M Bronze and 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze and 2M Black use a special upgraded engine, featuring split pole pins with a silver-plated copper wire.

The 2M Bronze and 2M Black also have interchangeable stylus units, and replacement styli are readily available.


Output Voltage (at 1kHz, 5cm/sec): 5mV
Channel Balance at 1kHz: 1dB
Channel Separation at 1kHz: 26dB
Channel Separation at 15kHz: 1-5dB
Frequency Range (at -3dB): 20Hz - 31kHz
Frequency Response 20Hz - 20kHz: +2 / -0dB
Tracking Ability at 315Hz: Typically 80µm
Compliance, Dynamic, Lateral: 22µm / mN
Stylus Type: Nude Shibata
Stylus Tip Radius r / R: 6 / 50µm
Tracking Force Range: 1.4 - 1.7g (14 - 17mN)
Recommended Tracking Force: 1.5g (15mN)
Tracking Angle: 20º
Internal Impedance / DC Resistance: 1.2kO
Internal Inductance: 630mH
Recommended Load Resistance: 47kO
Recommended Load Capacitance: 150 - 300pF
Cartridge Colour Body / Stylus: Black / Black
Cartridge Weight: 7.2g
Replacement Stylus Unit: Stylus 2M Black